screwed glands torque test apparatus

Brand Name:PEGO GROUP

Model Number:PG-SGT

Place of Origin:China

...GB2099.1 clause 24.6 and GB7000.1 clause 4.12.5, it is applied to test the screwed glands against the torque strength. Screwed glands shall be fitted with a cylindrical metal rod having a diameter equal to the nearest whole number of millimeters below the

Brand Name:Sinuo

Model Number:SN994

Place of Origin:China

..., and For Electric Vehicles" clause 26.5, table 15. Equipment Overview This screwed gland tester conforms to IEC 62196-1Ed.4CDV 2020 clause 26.5, table15. Based on the above table, the torque range is 5N.m to 12.5N.m. As per client’s requirements, the

Brand Name:Sinuo

Model Number:SN994

Place of Origin:China

...: Glands of screw thread ≦ M33 Application: Test the mechanical strength of the screwed glands Test Principle: Screwed gland is fitted with a cylindrical metal rod, one end is fixed, then test torque is applied on the other end by the spanner.

Place of Origin:China

Brand Name:KeRang

Screwed Gland Testing Machine HC9925 Standard: IEC 60598-1 clause 4.12.5, IEC 60884-1 2013 clause 24.6 Application: This device is use for test the torque resistance strength of screwed gland of lamps and similar appliances. Test sample: Screwed gland of lamps and similar appliances. Feature: Floor type support, lifting weights mechanism drive turntable to achieve torque test...

Brand Name:kingpo

Place of Origin:china

...test the torque resistance strength of screwed gland of lamps and similar appliances. Test sample: Screwed gland of lamps and similar appliances. Feature: Floor type support, lifting weights mechanism drive turntable to achieve torque test. Parameters:

Brand Name:HongCe

Model Number:HC9925

Place of Origin:China

... is use for test the torque resistance strength of screwed gland of lamps and similar appliances. Test sample: Screwed gland of lamps and similar appliances. Feature: Floor type support, lifting weights mechanism drive turntable to achieve torque test.

Brand Name:ZL

Model Number:ZL-3425

Place of Origin:China

...: 16.5, IEC60598: 5.2.11 and other standard provisions. It is used to evaluate power cords, and it is intended to be permanently connected with flexible cords. Perform two tests of tension and torque at the terminals to power cables such as

Brand Name:KINGPO

Place of Origin:China

IEC60065 Figure 11 Socket outlet Torque Test Apparatus Product information: This equipment is according to the requirement standard of IEC60065 Figure 11 and IEC60950.1 clause 4.3.6 to manufacture. A device provided with pins intended to be introduced int...

Brand Name:JLX

Model Number:LX-L1Y

Place of Origin:Made in China

... measuring and testing the torque strain exerted by appliances with plug pins on socket-outlets, in accordance with IEC 60065 clause15.4.1 and figure 11, IEC 60335-1 clause 22.3, IEC 60884-1 clause 14.23.2. The balancing arm of the test apparatus pivots...

Brand Name:HJ

Model Number:HC9921

Place of Origin:China

... and similar purposes – Part 1: General requirements' clause 24.1, figure 22-26. Application: Accessories, surface mounting boxes, screwed glands and shrouds shall have

Brand Name:Infinity Machine

Model Number:T6330

Place of Origin:Made in China

...Testing Apparatus for Open-and-closed Notebook Hinge Torsion Test Apparatus for Lab Testing Machine Purpose: Laptop hinge torsion test equipment is suitable for laptop, ultrabook, monitor and the other electronic products to do the torque test, and the torsion damping life-span test for the hinge, it can measure the torque...

Brand Name:SHC

Model Number:SC-NJ01

Place of Origin:China

...Torque Balance Test Apparatus Application: - Plug and Socket Torque Tester/Device is for compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus. - Plug Torque Tester/Equipment is a device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets. The balancing arm of the test apparatus...

Brand Name:AZBIL

Model Number:ACT NEW 10-III

Place of Origin:China

... positioner Model ACT Rating JIS 10K Material Carbon steel,stainless steel Fluid temperature -5 to +200℃ Gland type Screw gland Packing V sharped PTFE Ouput torque 12.5N.m Input signal 4 to 20mA DC seat Flat type Company Information Our

Brand Name:SKYLINE

Place of Origin:China

... of the plug-in device with plug-in pin on the socket during normal use is within the specified range. Compliance: It is suitable for testing the torque exerted on the output socket by the device which is to be inserted into the fixed output socket and is

Place of Origin:Guangdong, China (Mainland)

Brand Name:HAIDA

Model Number:HD-M001

0.7-4.5X Cookware Testing Apparatus For Torque Resistance , VML-CNC DESIGN STANDARD: BS EN12983-1 The Product Description: Graph function key, graph constructive functional key and visual tool functional key is separated by color and grouped tactically, it...

Brand Name:iqualitrol

Model Number:PS-2205S

...hinges, torsion springs, screws, encoder switches, smart wearables, door locks, etc. In addition to torque testing, it can also perform torque life, strength, damage and other test research at the same time. It is a general-purpose torque testing machine.

Brand Name:PTE

Model Number:pendulum izod metal materials impact test apparatus

Place of Origin:China

...test apparatus ​is used for measuring the metal material resistance performance under dynamic load, in order to determine the material properties under dynamic load. The principle machine of the testing machine has single supporting column structure, cantilever type pendulum hanging mode; the pendulum body is U-shaped. The impact cutter is installed and fixed by screws...

Brand Name:Lonroy

Model Number:LR-A101

Place of Origin:China

Lead Screw Dynamic Torque Measuring Equipment Torque Analysis Meter Description It can automatically measure both forward and reverse strokes. Customization of process thresholds, real-time feedback of quality indicators; The real-time imaging technology...

Brand Name:Neide

Model Number:ND-301

Place of Origin:China

Manufacturers Of Metal Screws Salt Spray And Accelerated Corrosion Test Chambers Production Description: The salt spray chamber stands as an indispensable apparatus within multiple industries, playing a pivotal role in evaluating the surface treatments of ...

Brand Name:MIYU

Model Number:MY-XZ-L1

Place of Origin:China

Torsion Testing Machine (MY-XZ-L1)​, with competitive price, both OEM and ODM available from us Technical Specification 1. Test speed: 5-60 times / min 2. Test times: 99999999 times 3. Test mode: Conduction test,Life test 4. Resistance range: 0—9.999Ω 5....