self ignition temperature test instrument

Brand Name:AI

Model Number:AIC-659

Place of Origin:China

Introduction: The Autoignition Temperature tester is suitable for detecting the spontaneous ignition point of liquid petroleum and petrochemical products such as heat transfer fluid, flame retardant hydraulic fluid, flame retardant turbine oil and flame ...

Brand Name:YUYANG

Model Number:SIP

Place of Origin:CHINA

...auto-ignition temperature of fire-resistant fluid used for power plant of People’s Republic of China. It is used to determine the self-ignition temperature of fire resistant oils used in the speed regulating system of power set which is over 30MW. I.

Brand Name:Delta

Model Number:CFRT

Place of Origin:China

... to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least

Brand Name:HTI

Model Number:HTB-016

Place of Origin:Guangdong,China(Mainland)

...Testing Equipment Plastic Ignition Temperature Test Apparatus Description: Decompose and release the combustible gas from plastic material under regulated testing conditions,ignited by outer flame and burned a certain time,to measure the minimum temperature of the material.Application comparison within material through the testing...

Brand Name:Sanwood

Model Number:SM-3P Sereis

Place of Origin:Guangdong, China

...chamber is consist of High temperature test area(Pre-heating area), Low temperature test area(Pre-cooling)area and test area(RT), adopt independent wind path switching mode to transfer hot and cold air to test area make sure the high low temperature swift,

Brand Name:HOOHA

Place of Origin:China

...the material.Application comparison within material through the testing results. Standard: ASTM D 1929,GB/T 4610,GB/T 9343, ISO 871 Specification: Furnace tube inner diameter 100 ± 5mm, length 240 ± 20mm, not less than 750 ℃ temperature ceramic tube;

Brand Name:HAIDA

Model Number:HD-E702

Place of Origin:Guangdong, China (Mainland)

Product Description: Temperature Humidity Chamber is a temperature controlled chamber designed to precisely control both humidity and temperature for environmental tests. It is ideal for testing the effects of environmental conditions on materials, ...

Brand Name:Shandong Shengtai Instrument Co., Ltd.

Model Number:SH706BS

Place of Origin:CHINA

...self ignition point meter The SH706BS fully automatic self ignition point meter is designed and manufactured according to the requirements of the standard SH/T0642-1997 "Determination of self ignition point of liquid petroleum and petrochemical products", and also complies with GB/T 21860-2008 "Test method for self ignition temperature of liquid chemicals". This instrument...

Brand Name:DAXIAN

Model Number:DX8602

Place of Origin:China

... by plastic hot air furnace method" and GB/T9343-2008 "Determination of flash ignition temperature and self ignition temperature for plastic combustion performance test methods". It fully complies with GB4610-2008 and also meets the

Brand Name:Gold

Model Number:GD-ISO871

Place of Origin:China

Ignition Temperature Tester Product Introduce The ISO 871 Ignition Temperature Tester is a professional equipment designed based on the ISO 871:2022 international standard, which is used to determine the ignition temperature of plastic materials. The instrument uses a hot air furnace to accurately control the air flow rate and temperature rise rate to determine the spontaneous combustion or ignition temperature of plastics in a high temperature

Brand Name:Shengtai Instrument

Model Number:ST129

Place of Origin:China

...varieties], automatic temperature compensation, empty machine to correct moisture, automatic shutdown, user can self-calibrate and correct error. Technical information Objects: grain and rice, wheat, corn, soybean, rapeseed, etc. Repetition error: ≤ 0.2%

Brand Name:kingpo

Model Number:KP-FT3540

Place of Origin:China

Test method for hot surface ignition temperature for A2L, IEC 60335-2-40 Annex KK KK.1 General The hot surface ignition temperature of A2L refrigerants shall be determined according to Annex KK. The refrigerants shall be sprayed onto a horizontal flat plate surface which is set at the test temperature. The test system consists of a hot plate, a spray tube and a chimney. Figure KK.1 , Figure KK.2 and Figure KK.3 display the set-up of the test

Brand Name:SKYLINE

Place of Origin:CHINA

...2008 and meets the requirements of ISO871-2006. It is used to test the burning and flame retardant properties of plastic materials. GB4610-2008Plastic Ignition Temperature Tester test principle: In the heating chamber of the hot air furnace, the pattern is

Model Number:HF-2000

Place of Origin:China

Brand Name:NANBEI

...Testing Instrument Digital Orthodontic Force Gauge Push pull digital force gauge,orthodontic force gauge,clamping force gauge,hf force gauge Product description HF series of digital push-pull force meter is a small, simple and versatile high-precision thrust, tensile testing equipment, widely used in electronic appliances, construction hardware, light industry and textile, auto parts, lighters and other ignition...

Brand Name:JINHAIHU

Model Number:LHX-401A

Place of Origin:China

... display, PID automatic temperature control instrument, from room temperature to 300 ℃, can set working temperature arbitrarily. Automatic constant temperature, box equipped with blast motor, make hot air forced convection, promote the sample under

Place of Origin:China

Brand Name:CHENGFENG

Plastic Spot Temperature Tester, Is Designed and Manufactured in Accordance with GB4610-2008 Product Description CF8602 Plastic Spot Temperature Tester Product Description: Also known as: GB4610-2008 ignition temperature tester GB/T9343-2008 plastic hot ...

Brand Name:LIYI

Model Number:LY-605A

Place of Origin:China

...85×129×65 Accuracy of temperature ±0.3℃ Distribution of temperature ±0.5℃ Application: The machine can provide the simulative heat of the sun and ultraviolet radiation environment of space. It is used for observing the anti-yellowing degree of the

Brand Name:VOUCH

Model Number:5114

Place of Origin:CHINA

... test, combustibility test of electronic industry, home electronic appliance and materials. The glow wire apparatus and common test procedure is to simulate the effect of thermal stressed witch may be produced by heat sources such as glowing elements or

Brand Name:Automatic closed flash point tester

Place of Origin:China

... a 260,000 color TFT True Color Liquid Crystal Display. This highly precise machine is capable of determining the volatile ignition temperature of the minerals, and the Flame ignition analyzer helps to accurately measure the

Brand Name:wangtebei

Model Number:WTB-8110

Place of Origin:China

... brittleness tester, low temperature brittleness tester technical parameters: 1. Test temperature and time: -70 degrees (normally more than 1 hour) 2. Impact speed: 2m/s±0.2m/s 3. After the constant temperature, the temperature fluctuation during the