signal surge protection arrestor

Brand Name:BRITEC

Model Number:BRRJ45L-4LR

Place of Origin:China

*, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img, picture, video, canvas, svg {display: block; max-width: 100%; } input, button, textarea, ...

Brand Name:HAMMOND

Model Number:HDOT-BNC/75D

Place of Origin:China

... cable, radio, TV, monitoring, video and other signal equipment. Signal lightning arrester in product design, according to the requirements of IEC61644, is divided into B, C, F. B level (basic protection) basic protection level (rough protection level), C

Brand Name:THOR

Model Number:TRSS-485

Place of Origin:CHINA

...signal, RS485 rail type lightning arrester, automatic signal surge protection device. Brief introduction The lightning protection device of the control signal is used for lightning protection of the data communication system. It can protect four signal lines or two pairs of twisted pair information lines, provide high energy coarse level protection and low energy fine protection...

Brand Name:Xi'an Shendian

Model Number:SDX-X/XX

Place of Origin:China

... voltage; 2/ Fast response ＜1ns; 3/ Multi-stage protection. Installation: 1/ SPD shall be connected with coaxial cable, as near as possible with protected device. 2/ It is necessary to replace SPD which arises transmission loss. Standard Technical Data:

Brand Name:Qing Zhu

Model Number:ZX-24

Place of Origin:XIAN,CHINA

... used in the double twisted wire information lines to protect the information technical system of the terminal equipment from damages. It can be applied extensively to fire alarm system and controlling circuit etc., to protect the electronic equipment and

Brand Name:Uchi

Model Number:OBVW-N/50C

Place of Origin:Dongguan China

... frequency signal receiving and sending systems. Connected in series in the antenna to prevent surges from intruding into the equipment along the feeder and causing damage. The selection of the antenna feeder lightning protection device needs to select the

Brand Name:Uchi

Model Number:OBVW-N/50C

Place of Origin:Dongguan China

... frequency signal receiving and sending systems. Connected in series in the antenna to prevent surges from intruding into the equipment along the feeder and causing damage. The selection of the antenna feeder lightning protection device needs to select the

Model Number:TS-SD Series

Place of Origin:Guangdong,China

Brand Name:TSTLP

...analog signal surge protection device TSTLP TS-SD Series analog signal surge protection device is for installation at LPZ 0B -2 or higher, protecting the RS422 / RS485 devices against lightning &surge damages, providing coarse and fine protection. Some ...

Brand Name:KLK

Place of Origin:China

...Surge Protection Device Technical Parameters Interface Form RJ45 Rated operating voltage Un 5V MAX Continuous running voltage Uc 8V Nominal discharge current In(8/20) 5KA Maximum discharge current Imax(8/20) 10KA limiting voltage Up 20V Network signal transmission rate Vs 10/100/1000Mbps self-adaption Network signal protection circuit 1,2,3,4,5,6,7,8 Network Signal...

Brand Name:TIAN RUI

Model Number:SMD3225

Place of Origin:China

...Surge Protector Arrestor with A Squared Surface Mount Package Description of SMD3225 1KA 0.5pF 1210 SMD Gas Discharge Tube Surge Protector Arrestor Gas discharge tubes (GDT) use noble gasses enclosed in ceramic tubes to provide an alternate circuit path for voltage spikes. The ceramic envelope and with nickel connectors allow for high loads. SMD3225 Gas Discharge Tubes (GDT) series has a surge...

Brand Name:FEEO

Model Number:FSP-D40

Place of Origin:China

... against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at

Brand Name:3onedata

Model Number:FL45-E100

Place of Origin:Shenzhen, China

...signal surge protector Introduction FL45-E100 100M Ethernet signal surge protector is designed by IEC61000-4-5 and ITU-TK20&K21 standard. It adopts multilevel protective circuit and the newest high-speed surge protection device which has quick response, low residual voltage output and excellent transmission performance. The interface is RJ45 which is easy to use and suit for 10/100M Ethernet device protection...

Brand Name:MTL

Model Number:SD32X

Place of Origin:INDIA

...SD Series is a range of surge protection devices combining unparalleled packing densities, application versatility, proven reliable hybrid circuitry, simple installation and optional ‘loop ...

Brand Name:CNAMPFORT

Model Number:MYL34S-561

Place of Origin:Dongguan,Guangdong,China

...Surge Protection Device Voltage Protection Varistors are used to protect a circuit from high voltage surges. When a high voltage surge is applied to a circuit, the outcome is usually catastrophic to the circuit. A capacitor may be installed across the signal lines. However, this capacitor cannot suppress voltage surges...

Brand Name:E-link

Model Number:LNK-SSP

Place of Origin:China

...Signal Surge Protector RS485 Signal Surge Protector PoE Power Splitter Advantages ► Flow capacity, fast response ► Multi-level protection circuit, residual depression ► Use the core components of international brand products, excellent performance ► Take place through the special treatment to avoid signal interference ► Small size, easy installation Technical Indexes Model Parameters SPD-D485A Signal

Brand Name:P+F

Model Number:K-LB-1.30G

Place of Origin:Germany

Surge Protection Barrier K-LB-1.30G 1-channel Mounting on DIN mounting rail For intrinsically safe or non-intrinsically safe 30 V applications Protects field or control circuit inputs Max. surge current (8/20 µs) 20 kA Uninterruptable operation (auto reset) Up to SIL 3 acc. to IEC/EN 61508 General specifications Number of protected signal...

Brand Name:YONGDE

Model Number:YH10W5-18/49.5

Place of Origin:Zhejiang,China(Mainland)

...Surge Lightning Arrester for Transformer Polymeric Surge Lightning Arrester: Polymer surge arrester is a device to protect electrical equipment from over-voltage transients caused by external (lightning) or internal (switching) events. Also called a surge protection device (SPD) or transient voltage surge suppressor (TVSS), thisclass of device is used to protect...

Brand Name:SONTUOEC ,WZSTEC

Model Number:ZSLY-D (SBO)

Place of Origin:China

... and are available in single-pole to four-pole versions. The use of high-performance varistors permits a rapid response time and a low protection level, without any line follow current. If circumstances are uncertain and there is a risk of fire from

Brand Name:P+F

Model Number:K-LB-1.30G

Place of Origin:Germany

Surge Protection Barrier K-LB-1.30G 1-channel Mounting on DIN mounting rail For intrinsically safe or non-intrinsically safe 30 V applications Protects field or control circuit inputs Max. surge current (8/20 µs) 20 kA Uninterruptable operation (auto reset) Up to SIL 3 acc. to IEC/EN 61508 General specifications Number of protected signal...