splitter fiber optic termination box

Brand Name:CY

Model Number:FDB 0132B

Place of Origin:Shenzhen, China

...splitter Fiber Optic Terminal Box / distribution box 1.Description: This product is applicable to use in FTTH project which is used after fiber optic cable to the building,installing in the corridor,basement, room and building's outer walls. It may distribute cables after installed splitter. It also may draw out room fiber optic...

Place of Origin:shenzhen

Brand Name:DYS/OEM

Model Number:FTTH-004

...fiber optic FTTH mini terminal box with 1X8 PLC Splitter Fiber Optic Terminal Box Product Details The wall-mounted optic fibre termination box allows for easy organization of optic fibre cables (up to 4 fibres, depending on the installed adapters.) The holes inside the box...

Model Number:MDU 216A

Place of Origin:Zhejiang,China

Fiber Optic Terminal Box, Splitter Terminal, Outdoor Fiber Termination Box, Optical Multi-dwelling Unit (16 fibers) Outdoor MDU 216A Splitter Terminal Description The MDU 216A Splitter Terminal from Optic Network Technology Co.Ltd. is rugged, low cost, low profile interconnection between central office and multi-dwelling units of FTTx application. The design of MDU 216A splitter terminal...

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-FDB-12D

Place of Origin:Guangdong, China

...Fiber Optic Splitter Box ABS + PC FTTH GPON Product introduction: - Optical distribution terminal box can be used in the connection and dispatch of outdoor optical fiber communication links, available for the connection of optical cable, optical fiber and patch cord, with the advantages of artistic appearance, convenient operation and long service life. - The wall mountalbe fiber optic terminal box...

Brand Name:UNIFIBER-OEM

Model Number:FDB36/48/72

Place of Origin:CHINA

...fiber optic termination box load with PLC splitter SC APC connector, splitting or direct splicing with drop cables This splitter distribution box is used for the distribution connection of cable and fiber optic communication devices. It leads out the optic signal from drop cable to pigtails by splicing in the box(also for surplus cables and adapters).It can be used for protective connection of cable and lay out pigtails,and fiber optic

Brand Name:J&K

Place of Origin:SHENZHEN,CHINA

16 Port SC UPC Connector Fiber Optic Termination Box 1x16 Splitter Box Features Industry Standard User Interface, be made of high impact plastic. Can accommodate 1x8 & 1X16 PLC splitter. Anti-UV, Ultra violet resistant and rainfall resistant. Up to 16 FTTH...

Brand Name:Begate, OEM and ODM

Model Number:Fiber optic terminal box

Place of Origin:Guangdong, China

... 5. Local Area Networks FEATURES 1. Industry Standard User Interface, be made of high impact plastic. 2. Can accommodate 1x4 & 1X8 PLC splitter. 3. Anti-UV, Ultra violet resistant and rainfall resistant. 4.

Brand Name:Blueto

Model Number:16core

Place of Origin:China

...cable direct or branch connection. Connecting to the optical communication equipment. It suits for the user's terminal access. Through the adapter installed in the box, the drop cable leads the signal out. and achieves optical fiber distribution. It also

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-FDB-12D

Place of Origin:Guangdong, China

...Fiber Optic Splitter Box ABS + PC FTTH GPON Product introduction: - KCO-FDB-12D is one of KCO-FDB box series products. - It come with 2 outdoor cable port and 12 ftth drop cable port. - The product can be upload with 1 pc of 1*8 or 1*12 LGX splitter or maximum 12 pcs of SC simplex or LC duplex adapter. - Optical distribution terminal box can be used in the connection and dispatch of outdoor optical fiber

Brand Name:HACEN

Place of Origin:CHINA

... Slot Box Type Splitter Fiber Optic Termination Box ONU distribution box Features - 100% tested on optical performance (Insertion Loss & Return Loss) - End-face geometry requirement complies to Telcordia GR-326-CORE - For end-to-end fiber connectivity - ...

Brand Name:FOCABLE

Model Number:FTTx enclosure with PLC Splitter

Place of Origin:China

Cost Effective FTTx Enclosure with PLC Splitter Easy Installed Pole / Wall Mount Available FTTX Enclosure is a new economic fiber distributed solution for outdoor use. Compare traditional products, FTTX Enclosure is easy to operate and has high ...

Brand Name:Yogel

Model Number:FDB-WG-LGX-24A

Place of Origin:Shanghai

...fiber access termination box with LGX Splitter 320x240x100mm Wall /Pole mounting distribution box Description FDB-WG-ADT-24A fiber access termination box is able to hold up to 24 subscribers. It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system. It integrates fiber splicing, splitting, distribution,storage and cable connection in one solid protection box...

Brand Name:CSYHT

Model Number:OTB-0216

Place of Origin:CHINA

... Optic Distribution Box Fiber optic terminal box NAP box for 1X16 PLC splitter for 1X16 PLC splitter for 1X16 PLC splitter is the perfect product for cable splicing and protection.It with 2 inlet ports suitable for diameter 6~12mm cable,16 outlet ports for

Brand Name:CFOFC

Model Number:Fiber Optic Distribution box

Place of Origin:Shenzhen，China

...Fiber Optic Terminal Box Distribution Waterproof IP65 1x8 1x16 Splitter PC ABS Description OF Fiber Optic Terminal Box Fiber optic fiber optical terminal box, termination box is applicable PLC Splitter/ coupler to a terminal access links FTTH access system. Specification OF Fiber Optic Terminal Box item value Model Number FTTH Fiber Optic Terminal Box Type Fiber optic terminal box...

Brand Name:ANC

Model Number:OTB-B01

Place of Origin:China

...Fiber Optic Termination Box with ABS Plastic Material Description OTB-B01 Fiber optic termination box manufactured by ANC International Co., Limited has 2 inport and 12 outports. It is designed for FTTH application and used for common cable connecting with drop cable/pigtail and optical splitter. Fiber Optic Termination Box is used at the junction point where armored cable and indoor FTTH drop cable is linked in optical fiber...

Brand Name:Takfly/DF/OEM

Model Number:FTKS-1805-04A

Place of Origin:Shenzhen, China

...Fiber Optic Termination Box Wall Mount With SC Pigtail PLC Splitter 4 Port IP65 Wall Mount Fiber Optic Termination Box could be loaded 4 Port SC Simplex/ LC Duplex Adapters, it could be used with Pigtails or PLC Splitter as option. Fiber termination box’s function is to provide the fusion between different optic fibers, the fusion of optical fiber and the tail of fiber optic, and the transfer of optic connectors. Fiber optic

Brand Name:yingda

Model Number:FTB008A-108SA

Place of Origin:china

...Fiber Optic Termination Box Uncut Optical Fiber Splitter 1x8 8 Ports Plastic ABS Uncut Optical Fiber Splitter 1x8 Cable Termination Box 2x3mm SC Loaded FTB008A plastic terminal box is indoor use only, mainly for distribution vertical cable from patch cord to end customer. It is placed on the wall or bottom of the floor cabinet niche by screws. The entry 2 ports can use multi-fiber...

Brand Name:Twilight Optic

Model Number:TW-AFAT-002A

Place of Origin:China

...Splitter Fiber Optic Terminal Box SC/FC/LC/ST IP65 Black Description AFAT-002A integrates distribution and splitting in one, can realize the direct fusion and branching of the optical cable, and is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic...

Brand Name:TTI

Model Number:RMF-PLC

Place of Origin:Guangdong, China

... attractive and durable. It is used for the termination of optic cable, 19” standard, rack mounted, for FC, SC, LC adaptors, convenience for use. This PLC splitter box meet the National Standard of YD/T925-1997. 1-2 cable-in ports,1~32 cores fiber out

Brand Name:Haiyu Optical

Model Number:HYG-FTB1600B-003

Place of Origin:China

...Fiber Splitter Box Description: Haiyu Optics Fiber Optic Termination box provides a good solution of indoor/ outdoor optic distribution , which is made of PC high intensity plastic material and integrated with splice tray and fiber management system. It has 8, 12, 16, 24, 32, 48, 72 and 96 fibers optional to meet different requirements. The termination both provide to load with splitter...