standard method solidification point test

Brand Name:AI

Model Number:BPT

Place of Origin:China

...Method Breaking Point Testing Equipment Summary This breaking point testing equpment is used to determine the temperature which a bitumen tends to break rather to flow when cooled and stressed as per standards GB/T 4510 and JTG E20-2011. It can do three tests at the same time in the same environment and calculate the average value. The cooling rate is controlled by computer. I. Main technical features The frass method...

Brand Name:Shengtai instrument

Model Number:SH113E-Q

Place of Origin:CHINA

... Method" and the standard of the People's Republic of China GB/T510 "Petroleum Pour Point Determination Method". It adopts the main control components composed of multiple single chip microcomputer, automatic refrigeration, automatic constant temperature,

Brand Name:Shengtai Instrument

Model Number:SH113Y

Place of Origin:China

...solidification point tester is designed and manufactured based on SY/T0541 crude oil freezing point measurement method. It adopts modern advanced technology and integrates mechanical, optical, electronic and computer technologies. It can automatically test the freezing point of petroleum products. This instrument uses photoelectric detection technology, automatic tilt method...

Brand Name:YUYANG

Model Number:YY120

Place of Origin:China

...Point Testing Equipment Description: This instrument is designed according the standards GB/T3536-2008 Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method, ASTM D92 and ISO 2592. It is applies to determine the flash point and fire point of petroleum products which the flash points higher than 79°C except fuel oils. Standards: GB/T3536-2008 Test

Brand Name:HOOHA

Place of Origin:China

...standards GB/T3536-2008 Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method, ASTM D92 and ISO 2592. It is applies to determine the flash point and fire point of petroleum products which the flash points higher than 79°C except fuel oils. Standards: GB/T3536-2008 Test Method for Flash Point and Fire Point...

Brand Name:HTI

Model Number:HTB-039

Place of Origin:Guangdong,China(Mainland)

...Point Testing Equipment Description: This instrument is designed according the standards GB/T3536-2008 Test Method for Flash Point and Fire Point of Petroleum Products - Cleveland Open Cup Method, ASTM D92 and ISO 2592. It is applies to determine the flash point and fire point of petroleum products which the flash points higher than 79°C except fuel oils. Standards: GB/T3536-2008 Test

Brand Name:BonninTech

Model Number:BNT-V4.0

Place of Origin:Wuhan, China

... intrusion test method to detect filtering accuracy and completeness of filter and filtration systems. Test methods meet FDA, National Pharmacopoeia and the GMP standards for sterile filter validation requirements. Application Range: Disc Membrane:Φ25mm-

Brand Name:ZL

Model Number:ZL-1025A

Place of Origin:China

...IP36 3.Professional supplier Equipment overview: Cleveland open cup flash point test equipment is applicable for determining measurement of flash-points and burning-points of petroleum products (the Cleveland open cup method) except petroleum products with

Brand Name:Infinity Machine

Model Number:ID6001

Place of Origin:Made In China

...Standard Packaging Incline Impact Testing Machine for Carton Box Model:ID6001 Application of equipment: It is suitable for product packaging boxes to simulate the slope impact test caused by the package tilting and sliding during transportation or dock handling to test the reliability of the packaging. Testing standard: ASTM D880 Standard Test Method for Impact Testing...

Brand Name:DAXIAN

Model Number:DX8348A

Place of Origin:China

..." and ISO5660-1:2002 "Test method for heat release rate of building materials". 2. The scope of use: The oxygen consumption calculated by the oxygen concentration in the gas flow of the ...

Brand Name:Sinuo

Model Number:SN773

Place of Origin:China

...-11-5, it is required by many of standard requirements, such as IEC60335-1 clause 30.2.3.2, Annex E, etc. The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the ...

Brand Name:Kejian Kinsgeo

Model Number:KJ-300S

Place of Origin:Dongguan China

...Testing Machine , PC Vicat Softening Point Tester Standard Configuration: 1. Three Testing frames 2. Three Dial indicators 3. One temperature sensor 4. Three thermal deformation pressure head 5. Three vicat test pressure needles 6. One set standard Weights Description: KJ—300S Thermal deformation and vicat softening point...

Brand Name:ROSCHEN

Model Number:2 inch

Place of Origin:China

...Standard Test Method for Penetration Test and Split Barrel Sampling of soils SPT Automatic Drop Hammer Roschen DH66 Automatic Drop Hammer which conforms to ASTM D1586-99 Standard Test Method for Penetration Test and Split Barrel Sampling of soils. The 140 pound (64 kg) weight has a 30 inch (762 mm) free fall before making contact with the anvil, thus, every test...

Brand Name:NL

Place of Origin:China

...Standard Bucket Tooth Point,Adapter and Tooth Place of Origin Zhejiang, China Warranty 6 months Video outgoing-inspection Provided Machinery Test Report Provided country of origin China Use industry Machinery repair shops,manufacturing plant,construction works Material alloy steel certification ISO9001:2015 Color yellow/customized Method...

Brand Name:iqualitrol

Model Number:HT-6510P

... applied the Pencil Scratch Method. Principle: The instrument applies mechanical measurement.Keep three point touch the coating(two wheel,a pencil core),and a 45 degree angle between pencil and test surface. Push the instrument sliding,pencil draws the

Brand Name:Gaoxin

Model Number:GX-6020-P

Place of Origin:China

...Standard Electronic Rupture Strength Machine 1. Product Name:Electronic rupture strength testing machine 2. Product Model:GX-6020-P 3. Description:The tester is applicable for the carton box rupture strength test for various industries. 4. Test standard: ISO-2759,GB/T6545, JIS-P8112,L1018,ASTM-D2210,TAPPI-T403 5. Technical Parameter: Item Specification Sensor method Pressure transducer Indicator method...

Brand Name:BOTO

Model Number:BT

Place of Origin:CHINA

... in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in

Brand Name:HAIDA

Model Number:HD-W

Place of Origin:Guangdong, China (Mainland)

...Standard Non-woven Plastic PP Medical Protective Mask Melt Flow Index Test Equipment Product Introduction: The non-woven plastic PP (polypropylene) in the mask generally has a flowability of 1000 ~ 2000g / 10min, which is a super-high-flow plastic. It cannot be tested by the melt index meter of the ordinary mass method, and we should use the volume Method of melt index test...

Brand Name:REFOND

Model Number:RF4008HP

Place of Origin:Shen Zhen, China (Mainland)

... testing machine, is based on the requirement of US AATCC201 testing standard, specially developed an automatic fabric drying rate tester. - RF4008HP is a highly intelligent and fully automated equipment. - It equipped with high ...

Brand Name:GDZX

Model Number:ZX-KSR

Place of Origin:Hubei, China

...point and fire point of petroleum products. Features 1 powerful, can test flash point and fire value at the same time with testing results printed out, real clock 2. High precision: temperature error ±1.5℃, resolution: 0.1℃ 3. Good repeatability: continuous test on same product, value difference ≤4℃ Meets standards: ASTM D92 4. Auto-test...