submarine yokohama type fender

Brand Name:Henger

Model Number:PRF

Place of Origin:China

Yokohama Type Customized Size Pneumatic Rubber Fender: CTN: Sling Fender: Submarine Pneumatic Fender: Color: We can according to your request to make black, white and ship gray colors. Advantage: 1. Our price is the ex factory price, we can supply you with the lowest price. 2. Our Pneumatic Rubber Fenders lifespan is about 10 years, similar with Yokohama Fenders. 3. Our products works the same as the Yokohama Fenders. 4. Our Pneumatic Fenders

Brand Name:Shunhang

Model Number:SH-SF 1

Place of Origin:China

... submarine fender are specially adapted to this application. The fender body is partially water-filled, then pressurised with air and ballasted to make it stand vertically, fender draft and performance can be tuned by altering the water: air ratio and

Brand Name:DockFender

Model Number:DF-YRF3.3*6.5

Place of Origin:CHINA

...Yokohama Fenders 80kPa STS Operations 3.3*6.5M Description According to ISO 17357-1:2014, the floating yokohama rubber fender have sometimes been colloquially referred to as “Yokohama Fenders” or “Yokohama type fenders”. Yokohama Fenders are ideal for mooring, ship to ship transfers, offshore platforms and floating docks requiring minimal maintenance. Yokohama Fenders...

Brand Name:Jerryborg

Model Number:JRB-HRB01

Place of Origin:Shandong, China

The following factors should be considered in the selection of pneumatic fenders: (1) Maximum energy absorption E; (2) Reaction force; (3) Distance requirements after berthing of two ships or the berthing distance from the ship to the dock, including the ...

Brand Name:BGO

Model Number:LB-0002

Place of Origin:Shanghai

... is the main technical data of the pneumatic rubber fender. As the tonnage of the ship increases, the impact energy of the ship contacting the shore or other vessels increases exponentially during berthing operations. The huge impact ...

Brand Name:LuHang

Model Number:LH2540

Place of Origin:Qingdao, China

... of ships. Since its creation until today, more than millions of fenders have been supplied worldwide both for ship-to-ship and ship-to-dock (STD) operations serving our valuable customers. II Fender Design and Structure Hydro Pneumatic Rubber Fender is

Brand Name:xincheng

Model Number:2.5*4.0,m

Place of Origin:China

... pneumatic fenders. Floating pneumatic rubber fenders are made of the synthetic-cord-reinforced rubber sheet with compressed air inside. The insider air can enable it to float on the water and work as a shock ...

Brand Name:Beierte

Model Number:Custom

Place of Origin:Qingdao

... fender products, using compressed air as buffer medium, make the ship when it is on the list has more soft wall effect, has big impact energy ...

Brand Name:HAOZHIYUE

Model Number:HZY-50

Place of Origin:China

.... Floating pneumatic rubber fenders are made of the synthetic-cord-reinforced rubber sheet with compressed air inside. The insider air can enable it to float on the water and work as a shock ...

Brand Name:FLORESCENCE

Model Number:JZ-FENDER009

Place of Origin:Shandong,China

...fenders which are cost effective and efficient solutions to suit any operating environment, condition and requirement. Solid rubber fenders have been used for ages since they are readily available and are considered long lasting. Rubber fenders come in different forms including, pneumatic type, Cone rubber fender, Supper Cell rubber fender, ‘Wing’ DO Rubber fenders, Foamed filled fenders, Arch type rubber fender

Brand Name:DOOWIN MARINE

Model Number:P50/P80

Place of Origin:China

ISO 17357-1:2014 Compliant Yokohama Type Floating Pneumatic Marine Rubber Fenders Floating pneumatic rubber fenders are known as Yokohama fenders or Yokohama-type pneumatic fenders. Floating pneumatic rubber fenders are made of the synthetic-cord-...

Place of Origin:China

Brand Name:CJJXL

Model Number:Ship Boat Yokohama Inflatables Fenders

...rubber & multi layer of rubber-dipped tyre fabric, is a leading anti-collision device for marine application in the world today. Yokohama Type Inflatable Rubber Fenders have become an ideal ship protection medium against collision among ship-to-ship (STS),

Brand Name:MolaStar

Model Number:Rubber Fender

Place of Origin:Chongqing,China

...Yokohama Type Pneumatic Rubber Marine Fenders PRODUCT DESCRIPTION : Pneumatic Rubber Fender also known as boat fender, floating fender or Yokohama type rubber fender, made by rubber & multi layer of rubber-dipped tyre fabric, is a leading anti-collision device for marine application in the world today. Pneumatic rubber fender...

Brand Name:JV

Model Number:JVL-39

Place of Origin:China

...Floating Rubber Fender * Pneumatic Rubber Fender Pneumatic Rubber Fender 1. Using internal compressed air as a buffer medium to absorb the impact energy of the ship, good elasticity, large energy absorption, ...

Brand Name:Zhiyou

Model Number:ZY-R002

Place of Origin:Shanghai China

... rubber fenders uses compressed air as medium to absorb the impact energy when ship-to-ship contact (STS) and ship-to-berthing (STB). Comparing with traditional bumper style rubber fender, it has the following advantages: 1. more energy absorption 2. less

Place of Origin:China

Brand Name:Huanghai

...fender HPF-C Pneumatic rubber fender is also known as dock fender, boat fender, floating fender, marine fender and yokohama fender. It is a popular soulution for boat protection forship-to-ship contact (STS) and ship-to-berthing (STB). Pneumatic fenders has the advantages of massive energy absorption with low unit surface pressure that acts upon the ship. So penumatic fenders...

Brand Name:UNIFORM

Model Number:AUTC-MA-330

Place of Origin:CHINA

PNEUMATIC FENDER (SLING TYPE) 2000 X 3500mm Product Description Dock bumpers also called rubber fender ,pneumatic fender, marine fender, yokohama fender, made by rubber & multi layer of rubber-dipped tyre fabric, is a leading anti-collision device for ...

Brand Name:starlink

Model Number:N/A

Place of Origin:China

Product Description: The gate type of this Automotive Mold can be chosen based on preference and requirements. It can be an edge gate, a gate located at the edge of the mold, a submarine gate, which is located below the parting line, or a gate that is ...