tct circular saw blade

Brand Name:kingpo

Model Number:YW-1185

Place of Origin:Mainland China

...Circular Saw Switch Endurance And Lower Guard Recovery Time Test Device Comply with standards: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Model:YW-1185 Purpose: Test the mechanical strength, durability test and recovery time test of the lower protective cover. Sample range: circular saw...

Brand Name:Kingpo

Place of Origin:China

...h Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is ...

Brand Name:HongCe

Model Number:HDD8301

Place of Origin:China

...Circular Saw Guard Test, diameter 12mm, length 50mm Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws...

Brand Name:HongCe

Model Number:HDD8301

Place of Origin:China

...blade. The perpendicular projection of the upper guard on to the blade shall cover at least the smallest recommended blade-cutting edge zone. The space between the upper guard and the blade shall be designed such that the test probe 'a' of Figure 105 when

Brand Name:HongCe

Model Number:HDD8302

Place of Origin:China

... 62841-2-5 clause 17.101 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws IEC Test Equipment Feature: The saw is to be set for a 90°cut and oriented in the

Brand Name:HongCe

Model Number:HDD8304

Place of Origin:China

... BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Application: It is used to test the circular saw switch performance and circular saw lower guard’s durability and recovery time. Test sample: Circular saws Feature:

Brand Name:HongCe

Model Number:HDD8304

Place of Origin:China

...Circular Saw Switch And Lower Guard, 0-250V/5KW Built-in Load Standard: EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301, IEC60745-2-5:2003 Annex BB.20.102, EN 60745-2-5:2010 clause 17.101 and clause 19.102.3. Application: It is used to test the circular saw switch performance and circular saw lower guard’s durability and recovery time. Test sample: Circular saws...

Brand Name:HongCe

Model Number:HDD8304

Place of Origin:China

...Circular Saw Switch And Lower Guard Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular saws Annex BB.20.102, Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301 Application of IEC Testing Equipment: It is used to test the circular saw switch performance and circular saw...

Brand Name:HongCe

Model Number:HDD8304

Place of Origin:China

...Circular Saw Switch And Lower Guard​ Standard of IEC Testing Equipment: IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular saws Annex BB.20.102, Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301 Application of IEC Testing Equipment: It is used to test the circular saw switch performance and circular saw...

Brand Name:HongCe

Model Number:CSG-1

Place of Origin:China

... BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard is to be cycled from the full closed position to the maximum open position and

Brand Name:HongCe

Model Number:HC9936

Place of Origin:China

... of pin-insulating sleeves Test sample: The material of pin-insulating sleeves Feature: High hardness test frame, equipped with circular blade and rectangular

Brand Name:HongCe

Model Number:HDD8302

Place of Origin:China

...m the fully open position to the fully closed position shall not exceed 0,2 s. For saws having a blade diameter 210 mm and above, the closing time of the lower guard from the fully open position to the fully closed position in seconds, shall be less than

Brand Name:HongCe

Model Number:HDD8305

Place of Origin:China

...saw above the guide plate, the rigid test probe ‘b’ of Figure 110 shall not contact the blade when the saw is set for a 90° cut and any depth of cut and the probe ‘b’ is centred with the blade then advanced in any single plane perpendicular to the blade and parallel

Brand Name:CANGZHOU FMS

Model Number:Cut To Length Line

Place of Origin:CHINA MAINLAND

...Slitting Machine Line Mini Slitting Machine uses extremely sharp rotary blades to cut large coil into strips of metal that have narrower widths. Circular Blades or Knives can be moved to make sheet metal strips of varying widths. Mini Slitter is designed as coil...

Brand Name:CANGZHOU FMS

Model Number:Cut To Length Line

Place of Origin:CHINA MAINLAND

.... Circular Blades or Knives can be moved to make sheet metal strips of varying widths. Mini Slitter is designed as coil slitter only. Used for both sheet metal ...

Brand Name:FMS

Model Number:Cut to length

Place of Origin:China

...rotary blades to cut large coil into strips of metal that have narrower widths. Circular Blades or Knives can be moved to make sheet metal strips of varying widths. Mini Slitter is designed as coil slitter only. Used for both sheet metal ...

Brand Name:skymen

Model Number:JP-120ST

Place of Origin:China

Circular Saw Blade Sharpener Industrial Ultrasonic Cleaner 100L 28Khz Strong Power To save customers' time and cost, Skymen has standardized some customized ...

Brand Name:TISCO

Model Number:65mn ck67 sae1075

Place of Origin:China mainland

... BA ANSI 6. Certification: ISO9001, SGS, CTI, ROHS 7. Application A. Rolling shutter door spring steel strip B. Band saw blade C. Packing steel strapping D. Stampings, clips E.

Brand Name:HENGCHENGTAI

Model Number:T-SS strip

Place of Origin:China

17-7ph plate SUS631 , Stainless steel strips/coils, For band saw blade, 0.15 - 3.00mm thick Product Description: Strip steel or cold rolled strip is a steel product that is produced from a hot rolled strip that has been pickled. The coil is then reduced...

Brand Name:Lichuang

Model Number:T-SS strip

Place of Origin:China

17-7ph plate SUS631 , Stainless steel strips/coils, For band saw blade, 0.15 - 3.00mm thick Product Description: Strip steel or cold rolled strip is a steel product that is produced from a hot rolled strip that has been pickled. The coil is then reduced...