terminal material brass linear slide potentiometer

Brand Name:Sanni

Place of Origin:China

...Slide Travel Linear Slide Potentiometer With 10kΩ Resistance And 100000 Cycles Mechanical Life Product Description: Product Overview - Linear Slide Potentiometer Type: Linear Slide Travel: 100mm Tolerance: ±10% Terminal Material: Brass With Silver Plating Electrical Life: 10,000 Cycles The Linear Slide Potentiometer is a type of linear potentiometer that is designed for precise and accurate measurement of linear...

Brand Name:Bonens

Model Number:slide potentiometer

Place of Origin:Sichuan, China

...linear sliding potentiometer 60mm Description: Slide Potentiometer is a sliding resistor that is formed by a resistance wire around the insulation material. It consists of a sliding film and a contact point that can be used to regulate the resistance of the circuit. The sliding tablet is located on the resistance wire, which can slide...

Brand Name:TQ

Model Number:C2031N

Place of Origin:China Guangdong

20mm travel 35mm full length 3pin metal handle single slide potentiometer Tuning speed regulation and dimming The skeleton and matrix are usually made of materials with good insulation properties, requiring heat and moisture resistance, good electrical ...

Brand Name:SCHNEEBERGER

Model Number:NDN 2-40.30

Place of Origin:Switzerland

...Linear Slide Bearing 1.Type: micro frictionless table 2.Specification: Part number NDN 2-40.30 Width 15 mm Height 30 mm Length 40 mm 3.Feature: (1) corrossion resistant steel material (2) with ball cage in brass (3) cage centering mechanism (4) for highest accuracy requirements 5.Application: high speed application 6.Picture: If you want to buy SCHEEBERGER NDN 2-40.30 linear slide...

Brand Name:YW

Model Number:YW-86470

Place of Origin:GUANGDONG, CHINA

...Brass material LED linear light fitting YW86470 Specification: 1.Main Wire Diameter ∅1.2mm(0.06”) 2.Construction 1*7,7X7,1*19,7*19 etc 3.Material Stainless steel / Copper / Galvanized 4.MOQ 1000pcs 5.Length 1000mm, as the requirement 6.Type Single leg 7.Surface treatment Chrome, Nickel, Black, White, and Silver 8.End parts of fittings Eyelets terminals...

Brand Name:OEM

Model Number:Electric Linear Rod Actuator

Place of Origin:China

... DC motor Input voltage: 12V/24V/36V/48V Drive system type: Gear Nut material: POM /Brass Rated load: 1200N Max stroke: 600mm Feedback signal: Optional (potentiometer) Finish: Power Coated Duty cycle: 25% Limit switches: Built-in

Brand Name:ANYO

Model Number:PT10L-H

Place of Origin:CHINA

... only two terminals are used, one end and the wiper, it acts as a variable resistor or rheostat. There are also different types of Potentiometers like Wire Wound type and ceramic type using different materials on resistive element. Carbon Potentiometer can

Brand Name:BOCHEN

Model Number:WXD3-11

Place of Origin:Chengdu

... 5k Ohms 5% Lin 0.3% Multiturn Wirewound Potentiometer For Test And Lab Equipment Quick Detail • Wirewound element, gold plated brass terminals. • Customised 3 and 5 turns models available. • Independent Linearity 0.3%. • Wide ohmic range 100Ω~50K...

Place of Origin:Made in China

Brand Name:CPMDJ

Model Number:YDK139-250-6

... Winding Product Description NO. Model Hz Material ROT BEARING Voits INS.CL 1 YDK120/30-6 60 copper CW-LE BALL/SLIDING 220 B Product materials 1. Rolling bearing, low noise high quality material. 2. Brass terminals plug-in. 3. Shaft: single shaft, nickel ...