test finger blender probe

Brand Name:HJ

Model Number:HT-I24

Place of Origin:China

... Test Finger Probe Blender Probe Nylon Handle Stainless steel Probe Standard: IEC 60335-2-14 ‘Household and similar electrical appliances - Safety - Part 1: General requirements’ clause 20.102. Standard description: Blades of hand-held blenders shall...

Brand Name:PEGO

Model Number:PG-FNP

Place of Origin:China

... is mainly used for the puncture-proof test of the accessible part of the solid insulation, also it is used to test whether the non-removable parts of an electric shock or release moving part are able to withstand the mechanical stresses that occur during

Place of Origin:HONG KONG

Brand Name:ALLIED TESTING

Model Number:TPFN

Test finger nail probe,IEC 60065 UL 1025 Model TPFN: Finger Nail Probe For testing the requirement of snap-in devices and snap together enclosures that protect the user from accessibility to hazardous parts. Complies with most Standards including IEC 60335...

Brand Name:Lonroy

Place of Origin:China

...Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Introduction 1. Reference to the standards IEC61032 IEC60335 IEC60065 2. It use for testing the electric products, to test safety of it. With the 50N force to press the probe instead the finger to measure electrical safety. IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger Technical specification Test...

Brand Name:kerang

Model Number:HT-I22

Place of Origin:CHINA

Test Finger Nail HT-I22 Standard:IEC 60335 figure 7. Application:It is applicable for the non-removable components which are used for electric shocking water or touching the movement parts to see whether they can go through the mechanical stress that happened in normal use. Thus to judge the components conform to the required protection grade or not. Test...

Brand Name:HongCe

Model Number:HT-I02B

Place of Origin:China

...Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: This probe is intended to verify the stability and mechanical hazards of blenders. Test sample of Test Finger Probe: Blenders. Feature of Test Finger Probe: A test probe similar to that of test probe...

Brand Name:KingPo

Place of Origin:China

... Product information: The blender probe complies with IEC60335-2-14 CI.20.102. It is used to test whether the blade of hand-held stirrer is completely concealed from above and flat surface can be touched when the blade is rotating. The test is achieved by

Brand Name:SHC

Model Number:SC-F1218 F1319

Place of Origin:China

... Probe is the necessary appliance to prevent electic shock for household and similar electrical problem Technical Parameters: 1. Knurled Finger Diameter: 5.6mm 2. Knurled Finger Length: 44mm 3. Head Radius: 2.8mm 4. The First Headle Diameter: 25.9mm 5. The

Place of Origin:China

Brand Name:BONAD

Model Number:BND-19

...Test Finger 19 IEC61032 Children Test Finger 19 Article NO.:BND-19 Specification: Children Test Finger / Children Test Finger19 1, According to : IEC61032-1997 Fig12 and Fig.13 / EN71 ASTM F963 and UL 2, Children Test Finger 19 Probe is the necessary appliance to prevent electric shock for household and similar electrical problem Technical Parameters: 1, Knurled Finger Diameter: 5.6mm 2, Knurled Finger...

Brand Name:kingpo

Model Number:IEC61032 figure 7

Place of Origin:china

... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test

Brand Name:GESTER

Model Number:GT-MB06

Place of Origin:China

...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Finger With Alligator Clip Product overview: This is a precision test finger made in accordance with IEC61032 figure 2 test probe B, it is required by IEC 61851-1 clause 8 and 12.4,etc. Application: This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe...

Brand Name:Sinuo

Model Number:SN2210-2

Place of Origin:China

...Test Probe For Electric Vehicle Connector Test Complied Standards & Clauses IEC 62196-1Ed.4CDV 2020 clause 10.1. Equipment Overview This is a precision test finger made in accordance with many standards like IEC 62196-1Ed.4CDV 2020 clause 10.1. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe

Brand Name:HTI

Model Number:TW-204A/B

Place of Origin:Guangdong,China(Mainland)

...Probes Toys Testing Instrument Fake Finger Touch Probe Testing Equipment Description: To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Applications: Accessibility probes are designed for two age groups: Probe...

Brand Name:YUYANG

Model Number:YY1132

Place of Origin:China

...Test Finger Probe Toys Testing Equipment For Children Safety Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe...

Brand Name:JLX

Model Number:LX-1819

Place of Origin:Made in China

...Test Finger Probe 18 and 19 , IEC61032 Jointed Children Test Finger Product information: Children finger probe 18 conforms to IEC61032 figure 12 finger probe 18, IEC335.1,UL1017 standards. It is used to simulate the children who are older than 36 months and younger than 14 years to test whether the hazardous parts can be touched. Children finger probe 19 conforms to IEC61032 figure 13 finger probe...

Brand Name:Kinte

Model Number:WH-8601

Place of Origin:Guangdong,China (Mainland)

GB4706.1 Standard Test Finger Pin Electrical Test Probes WH-8601 Standard test finger, pin (test probe), pin: meet the standards: GB4706.1, GB8898-97, GB2099.1-96, IEC884-1 the corresponding provisions of the requirements.

Brand Name:YUYANG

Model Number:YYT010C

Place of Origin:China

Test Finger Probe Toys Testing Equipment For Children Toys Testing Equipment Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Test...

Brand Name:Better Health

Model Number:DM100

Place of Origin:CHINA

...h varying specifications to meet the needs of different surgical procedures. Our probes are made from high-quality materials and are designed to be durable and long-lasting. We also offer customized OEM and ODM designs to meet the specific requirements of