test probe with dynamometer

Brand Name:Sinuo

Model Number:SN2210-7T

Place of Origin:China

Test Probe 11 with Dynamometer 75N Standards: Standard:it is designed and made according to IEC 61032 Figure 7, required by many standards such as IEC 60884-1:2013, IEC 60669-1: 2017, IEC 60335-1:2020, etc. Application:It is used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strengthen of openings in the enclosure or internal barriers. Test...

Place of Origin:China

Brand Name:HongCe

Model Number:HT-I11

...Test Probe 17 Test Wire Product information: The test wire confirms to the IEC61032 figure 11 test wire 17 standard requirements. It is used to verify whether the live parts of the electric toy can be touched. It is equipped with handle which is made of nylon. Customizable: It can be used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer...

Brand Name:SHC

Model Number:SC-IP1X

Place of Origin:China

... for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with

Brand Name:kerang

Model Number:HT-I15

Place of Origin:CHINA

... with nylon handle. Test sample:Easily accessible enclosure live parts or mechanical parts. Feature:It is used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). Parameters:

Brand Name:KingPo

Place of Origin:China

... mechanical parts. It is equipped with nylon handle. Customizable: It is used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). Standard:IEC61032 test probe 32 figure 15.

Brand Name:SEELONG

Model Number:SSCD350-1000/3300

Place of Origin:China Luoyang

... calibration, the dynamometer spindle is locked by shaft locking mechanism, which makes the dynamometer spindle fixed and unable to rotate. The calibration arm is installed on the end of the torque flange of the dynamometer, on the calibration arm, the

Model Number:TP11

...test probe,rigid test probe,safety test probe,probe test Model TP11: 75N force test probe,rigid test probe,steel test probe rigid test probe is used to assess protection of persons against access to dangerous parts and to assess the mechanicalresistance of openings in the enclosure or inner separations. rigid test probe is made of high-grade steel in accordance with the standards and conforms the measures of the flexible finger probe

Brand Name:PEAKMETER

Model Number:T3002

Place of Origin:China

...Test Probes And Pen-Typing Lead Probe Wire Features Probe Length: 120mm/Probe Tip Ø2mm Probe Plug: Ø4mm Cross Plug, Right angle type Probe Wire: 22AWG, red/black Length: 800mm Safety Class: EN61010-031, 1000V CAT Ⅱ, MAX 10A DESCRIPTION 10A ULTRA SOFT PROBE TEST Lead Length Probe...

Place of Origin:China

Brand Name:AA4C

Model Number:vehicle chassis dynamometer

...car vehicle test line vehicle Inspection Station 15T ROLLER BRAKE TESTER WITH AXLE LOAD vehicle chassis dynamometer CTFZ-13B DOWNLOAD USER MANUAL:AA4C Chassis Dynamometer User Manual CTDCG-xx.pdf... DOWNLOAD PIT DRAWING:AA4C 3T chassis dynamometer pit ...

Brand Name:WINNER

Place of Origin:CHINA

...Test Probes Well-established test probes for contacting PCBs For optimal contact to the test points (e.g. pads, vias, and pins), various tip styles with various diameters and finishes are available. Various spring forces available as well as versions with stainless steel springs suitable for high temperatures Used for setting the optimum stroke conditions in the test...

Place of Origin:China

Brand Name:BONAD

Model Number:BND-11

IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Product Description IEC61032 Rigid test probe 11, IEC60529 Rigid test probe 11 Introduction: Bonad offers a wide range of probes to meet the most common standards including those from IEC, EN, UL, ...

Brand Name:Pego Tester

Model Number:PG-IP

Place of Origin:China

...probe C for IP3X testing: Φ2.5 rod-length 100 Test Probe D for IP4X testing: Φ1.0 wire-length 100 Test Probe 1: 500g steel sphere Test probe 2: 15g steel sphere Test Probe A Introduction: Designed according to IEC61032 fig.1, and meet the requirements of

Brand Name:kingpo

Model Number:IEC60335-1- clause 20.2.

Place of Origin:china

... 2.Knurled Finger Length:80mm 3.Baffle Plate Diameter:50mm 4.Baffle Plate Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1.

Brand Name:Charter Leader

Model Number:CLP-RF11GSMPM

Place of Origin:China

...test connector adapter RF coaxial test probe The Current Monitoring probes may be used whenever RF current measurements are required. Current measurements are made by placing a current carrying conductor within the “sensing” window of the probe and measuring the probe’s output voltage with an RF detector. Calibration of the probe...

Brand Name:HJ

Model Number:HT-I09

Place of Origin:China

...Test Pin Probe HT-I09 IEC61032 Figure 9 Test Probe13 Metal Pin Tip Diameter Ф3 Standard of Short Test Pin Probe: IEC61032 figure 9 Test Probe 13, IEC60950 figure 2B, IEC60335 and IEC60065. Application of Short Test Pin Probe: This pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment. Feature of Short Test Pin Probe: It can be used for enclosure protection test...

Brand Name:Sinuo

Model Number:SN2110A

Place of Origin:China

...Test Probe 20N Complied Standards & Clauses The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Equipment Overview The test probe confirm to the IEC 62196-1:2022 clause 10.2, figure 9. Touching the specimen with the end of the probe and then respectively exert the force of 20N until the probe...

Brand Name:SKYLINE

Model Number:SL-P11

Place of Origin:China

...Test Rig 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706 and other standard requirements. It can also be used to test the mechanical strength of the holes in the housing or the internal baffle of the housing. Can be ordered with 10~50N thrust. Can be ordered with 10~75N thrust. Test Finger Usage 1. As shown in the figure, the finger portion of the thrust test

Brand Name:WIND AUTOMATION

Model Number:WIND-MTS-80

Place of Origin:China

...Dynamometer N·m Testing Machine Current Voltage RPM Tester WIND-MTS-80 (1) Competitive Advantages a. Quick and accurate identification of motor defects in the production process of welding, winding, finishing, etc., and the location of the fault point, to facilitate the operator to repair the bad product. b. Hysteresis Dynamotmeter test torque with loading, use 1N·m, 5N·m,10N·m Or 20N·m torque to test...

Brand Name:SKYERSCALE

Model Number:CSW6

Place of Origin:China

550t Strong Shackles Digital Weight Load Link Crane Load Test Wireless Electronic Dynamometer Specifications: (Dimensions shown are nominal and subject to tolerances) Model Cap. Div A B C D φ H Material (Kg) (mm) (mm) (mm) (mm) (...

Brand Name:GE

Model Number:IC9-RS

...Probe ultrasonic testing probes repair crtstal 1. Frequency: 5.0-8.0Mhz 2. Compatible system: Voluson S10, Voluson P8 3. Application: OB/GYN & urology 4. original, in good working condition 5. With 90 days warranty Knowledge Point The IC9-RS Real-time 2D Endocavitary Probe...