threaded terminal stress tester

Brand Name:Sinuo

Model Number:SNQC1012B

Place of Origin:China

Terminal Stress Tester for Screwless & Threaded Connectors UL486A-B Compliance Device Product Information: This testing device conforms to UL486A-B clause 9.3.2.1, clause 9.3.2.3, clause 9.3.2.4 and table 26 and figure 6, IEC60947-1, etc. Specimens and restrictions: Screw terminals, threadless terminals and connectors. Test purpose: To examine whether the screw terminals and threadless terminals can withstand the mechanical stresses...

Brand Name:HJ

Model Number:HC9904

Place of Origin:China

...’ clause 12.3.11 Application: Screwless terminals shall withstand the electrical and thermal stresses occurring in normal use. This device is use to check whether the screwless terminals can withstand the electrical and thermal stresses occurring in

Brand Name:Sinuo

Model Number:SNQC1012B

Place of Origin:China

... clause 9.3.2.4 and table 26 and figure 6, IEC60947-1, etc. Product Overview Specimens and restrictions: Screw terminals, threadless terminals and connectors. Test purpose: To examine whether the screw terminals and threadless terminals can withstand the

Brand Name:kingpo

Model Number:KP-WQ84

Place of Origin:china

...Terminals Deflection Tester + Voltage Drop Tester Products Introduction/ This device complies with IEC 60884-1 clause 12.3.12 and figure 12, it is used to use to check whether the screwless terminals connected rigid solid conductor remains clamped, even when it has been deflected during normal installation. Deflecting the conductor and measuring the voltage drop, to check the screwless terminal

Brand Name:HongCe

Model Number:HC9905

Place of Origin:China

Screwless Terminals Deflecting Tester +Voltage Drop Tester HC9905 Technical Parameters: Parameters Name Parameter Data Input supply AC120V±10%, 60Hz Deflecting angle 0-360° Deflecting direction In any of the 12 directions differing from each other by 30...

Brand Name:HTI

Model Number:TNJ-012

Place of Origin:Guangdong,China(Mainland)

Automatic Foam Stress Tester Description: Foam Stress Tester is used to test the stretch, compress, bend, low cycle fatigue of metal andnonmetal, high polymer material etc. Foam Stress Tester can be programmed according to customer's requirement base on ...

Brand Name:SKYLINE

Model Number:SL-T812

Place of Origin:China

SL-T812 Terminal Pull Tester Use Terminal tension tester is a testing equipment developed by our company for the wire harness and electronics industry. Designed to detect the pull-out force of various harness terminals. Configurable NK, HF push-pull gauges...

Brand Name:KINSGEO

Model Number:KJ-1065

Place of Origin:China

Single Column Fabric Tensile Strength Tester Lab Thread Breaking Force Tester Usage This machine is designed for quick and reliable tensile, compression, bending, shear, peel, loop tack and fatigue cycling on metals, tape, composites, alloys, rigid ...

Model Number:A7TC

Place of Origin:China

... Electrode Type Nickel Middle Electrode Tip Configuration Projected Terminal Type Threaded-Terminal OE No. YAMAHA: 94700-00835, 94703-00216, 94700-00835-00IV, 94703-00254 TOYOTA: 90098-22765, 90098-...

Place of Origin:Guangdong, China

...convenient specimen clamping, simple operation, etc. It is the ideal equipment for wiring harness factory to ensure product quality. EMH Terminal pull force tester is a kind of testing equipment to wiring harness and electronic industry, specifically used

Brand Name:Aolittel

Model Number:DRL 2.7V3000 F (60x138)

...Threaded Terminal Low ESR Ultracapacitors Electric Double Layer Capacitor (EDLC) Ultracapacitor Cell Capacitance: 3000.0 F -10/+20% Voltage: 2.7V Dimensions: L = 138mm, OD = 60.7mm Temperature Range: -40°C to +65°C Features: 2.7V operating voltage Ultra low internal resistance Over 1 million duty cycles Threaded terminal...

Brand Name:PHIDIX

Model Number:Customized

Place of Origin:Shanghai, China (Mainland)

...Push Pull Cable Marine Engine Throttle Control Cable With 1/4-28 Threaded Terminal 【 Product Description 】 Cable has two clamp fittings. There is a 1/4-28 threaded terminal at each end. 3" nominal travel. 5" minimuim bend radius. Construction...

Brand Name:Anfeng / AF

Model Number:STE-50

Place of Origin:China

... for wire rope with a diameter from 1/4" to 2-1/4", thread sizes from M12 to M90. The Threaded Swage Studs are designed to be swaged or crimped into position. Available in left- or right-handed thread. Metric threads available upon request. They are

Brand Name:YUJINSHENG

Model Number:stainless steel 304、316

Place of Origin:China

... of the hardware eyelet screw terminal is to be used for electrical connection, ensuring the stable connection of the wire and the normal operation of the equipment. ‌ The hardware eyelet screw terminal uses a threaded connection to firmly fix the wire...

Brand Name:ISURE MARINE

Model Number:DIFFERENT SIZES FOR CHOICE

Place of Origin:CHINA

STAINLESS STEEL THREADED TERMINAL SET Quick Detail: 1.Material:stainless steel 2.Package: In cartons or as per custome’s requirement 3. High quality with best price Deatailed Product ...

Brand Name:DAXIAN

Model Number:DX8428

Place of Origin:China

IEC62730-2024,IEC62217-2012 Polymeric Insulators 5000hrs Multiple Stress Test Machine 1. Test sample: Two test insulators of the same design with a creepage distance between 500mm and 800mm, 2. Procedure: Conduct the test in a sealed, damp, and corrosion-...

Place of Origin:China

Brand Name:CHENGFENG

Equipment use: It is suitable for placing the test piece between the upper and lower compression plates of the machine, compressing 25% and staying for 20 seconds, and the load divided by the area of the test piece is the compression hardness of the ...

Place of Origin:United States

#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width:750px;height:869.6202531645571px;margin-top:0;margin-bottom:0;margin-left:0;margin-right:0}#detail_decorate_root .magic-2{margin-top:0;margin-left:0;width:750....

Brand Name:KAIDA

Model Number:D38999/33F15C

Place of Origin:China

Part Number:D38999/33F15C Product Description: Product Overview: D38999 Dust Caps The D38999 Dust Caps are protective caps designed specifically for D38999 connectors with a shell size of 15. These caps are essential for protecting the connector when it...

Place of Origin:Chongqing, China

Brand Name:Honghao

Model Number:HHXX-175

Specification item value Material Stainless Steel Type Swage Stud Place of Origin Chongqing Color Silver Brand Name honghao Production technology Welded Size M4- M24 Standards GB, DIN, ISO, ASTM, etc Material Carbon Steel,Stainless Steel, Alloy Steel,...