tungsten carbide endmills 3mm

Brand Name:KINGTOOLS

Model Number:4F-10*25*10*75

Place of Origin:SICHUAN, CHINA

...Tungsten Carbide Endmill Cnc Router Bits Cortadores End Mill For Stainless Steel Product Introduction: 4 flutes: high rigidity, widely used in shallow slot, profile milling, and finish maching. 35 deg: high adaptability to the material and hardness of workpieces, widely used to mold and product processing and cost efficient. ​Specification: Name: END MILLS Material: 100% raw material carbide Metrial: Tungsten Carbide

Categories:Flat End Mill

Country/Region:china

Product Description wxsoon 55HRC 2 flute 3mm tungsten carbide endmill for harden steel Cutting Diameter 3mm Flute Length 4.5mm Shank Diameter 6mm Total Length 65mm Helix Degree 30 Numbers of Flutes 2 Brand ...

Brand Name:Seego Carbide

Model Number:Tungsten Carbide Endmills

Place of Origin:Hunan of China

...Tungsten Carbide Endmills for CNC Cutting Machines Discription: All of our Carbide tools are manufactured utilizing the finest sub micro-grain carbide materials to ensure maximum performance. For starters, when it comes to Carbide End Mills, we offer an unmatched selection to meet nearly every imaginable requirement. Seego Carbide...

Brand Name:Jin Tai Pai

Model Number:D1-D20 customized dimension available

Place of Origin:China

China Carbide Tool Supply Wholesale Tungsten Carbide EndMills Aluminum Steel End Mill Feature Dimensionally accurate Stable performance Good wear and corrosion resistance High tensile ...

Place of Origin:China

4 Flutes Solid Carbide Endmill HRC 45° and HRC 55° 1 Suitable for Copper, Cast Iron, Carbon steel, and Mould steel processing. 2 Main features: Grain size carbon tungsten. High toughness, ALTIN coating, high wear-risistance, special use for high speed ...

Brand Name:JT

Model Number:JT

Place of Origin:China

...Tungsten Carbide Endmill Diameter 0.2 - 3.0 mm Description Diameter:0.2-3.0mm Hardness:HRC 55/60/65 Material:Tungsten Steel Flute:2-4 or Customizable We use 100% original raw material, the micro grain tungsten carbide powder and cobalt powder(from German)to make the carbide rod, hardness can be 92.5-94.0(HRA), and T.R.S. is 4200-4800(N/mm2), this carbide...

Brand Name:TS

Model Number:D4*F10*50L*C4*2T

Place of Origin:CHINA

...Tungsten Carbide 2 Flute D4 End Mills H60RC It has the characteristics of high precision. The special chip groove can Improved chip evacuation & increased edge/corner strength to reduce any risk of breakage. and the can insure capable of machining a wide range of materials & operations. It has the characteristics of high precision, high finishing surface of works and long lifespan when processing. Material: Tungsten Carbide

Brand Name:OEM

Model Number:customized

Place of Origin:Zhuzhou City, Hunan Province, China

...Tungsten Carbide Router Bits Milling Metal Cutter Product Description HRC 58 Flute 2 Category Flat Spiral angel 35° Diameter D1-D20mm Overal length 50-150mm Machine type Side face, Step shoulder, Straight slot Advantages 1. With excellent cutting performance in both dry and wet cutting. 2. Using fine-grained high-quality carbide...

Brand Name:JWE

Model Number:JI10/JF10/JF12

Place of Origin:China

.... 1. Grade: ISO K10-K40 2. Did: 0.4 mm-40 mm 3. Length: 330 mm 4. Surface: Unground or H6 Ground Carbide Rods with Single Hole Unit: mm Other custom size could be discussed. D L B Tolerance 3.0 300/310/330 0.3 ±0.1

Place of Origin:Sichuan, China

Brand Name:Kedel

Model Number:MJP-K0804

... Cut Shape Set Bits 3mm Wood Sphere Concave Cutter Tungsten Carbide Steel Rotary Burr Product Name Tungsten carbide burr Brand Kedel Application Polishing/Deburring/Carving/Machining etc. Material 100% Virgin tungsten carbide Grade MC115/MC118/MC118X ...

Brand Name:BWIN

Model Number:D1.5*5*50*D4

Place of Origin:China

Cnc Carbide End Mill 2F Flat Endmill HRC45 Milling Cutter CVD Coated 1.5mm 6mm Quick Detail: Suitable for cutting carbon steel, alloy steel and steel parts with HRC below 45 °; Through characteristic design, the cutting process is lighter, the tool ...

Brand Name:OME

Model Number:custom

... amounts of material at high speeds. Made of solid carbide, they are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their ...

Place of Origin:Shandong, China

Brand Name:Ying Ba

Model Number:minizi

Online Wholesale Tungsten Steel Mini Engraving Milling Cutter for Carving & Cutting Acrylic Sheets Mini Character Processing Company Profile Our company is a factory specializing in the production of CNC milling cutters with a history of 20 years. We have ...

Brand Name:Zhenfang

Model Number:ZF0196

Place of Origin:China

...: wearing parts Hardness: HRA91 Strength: > 690Mpa Advantage: high ware-resistance. Applications of YL10.2 Tungsten carbide tips drill rods for drills and endmills solid tungsten carbide rods are used for cutting aluminum alloy, cast iron, stainless steel,

Brand Name:OUQI

Model Number:Unground Rods

Place of Origin:China

...making endmill, drills, reamers Carbide Grade: YL10.2 with Hardness: HRA 91.9 TRS 3800 and Density: 14.45 Our tungsten carbide rods are widely used for making endmills, drills, reamers, and other cutting tools. with good quality and competitive prices, the

Brand Name:CTCB-AP

Model Number:Carbide Ball Nose End Mills

Place of Origin:Hunan,China

... of components required in aerospace, medical, mold and die, and power generation industries. The high quality, low cost production advantages of carbide end mills have come as a direct result of dedicated micrograin carbide structures,

Brand Name:RI XIN

Model Number:YL50,YU06,YU08,YU09,YU12,YF06,YF08,YG6X,YG8,

Place of Origin:ZHUZHOU,HUNAN,CHINA

...carbide rod,Tungsten carbide rod,PCB drill,Endmill rod Customized cemented carbide rods:YL50,YU06,YU08,YU09,YU12,YF06,YF08,YG6X,YG8,YL10.2 Characteristics:Made of sub-micron and ultra-fine WC with homogeneous property,good wear resistance and high toughness Application:widely used in endmills...