tungsten carbide torx punch pins

Brand Name:Henghui

Model Number:Customized

Place of Origin:Chongqing

Factory Direct Punch Pins for Making Screw ODM Precision Stamping Mold Parts Tungsten Carbide Torx Punch Pins Material: Carbide＞M42(H59)＞M35(H55)＞M2(H9) H9(M2) Chemical Composition C Si Mn P S Cr Mo V W Content (%) 0.85 0.33 0.34 0.027 0.005 4.12 4.73 1.78...

Brand Name:SENLAN

Place of Origin:China

...Tungsten Carbide Die Punch Pins For Stamping Punch Die Application of Precision Tungsten Steel Punch Pin: (1) In the plastic mold, it is also the most common to separate the product from the mold; (2) Tungsten steel hard alloy punches, such as tungsten steel punches, can be used to pass through longer and finer holes; (3) The tungsten steel punch pin...

Brand Name:QY

Place of Origin:China

....carbide punches, die buttons,embose punches,bottom die. Punch die ,embosing die,guide lifter pin,burring punch pin Material: SKD11. SKH51. SKD61.ASP CARBIDE..More materials Hardness: 58-60HRC. 60-62HRC. 45+-5HRC. 64-67HRC. 84-89HRC Standard: MISUMI .DME,

Brand Name:Henghui

Model Number://

Place of Origin:Guangdong

Tungsten Carbide Die Punch Pins For Company Specialization And Strength Tool Steels *, *::before, *::after {box-sizing: border-box;}* {margin: 0;}html, body {height: 100%;}body {...

Brand Name:BG

Model Number:PT-15

Place of Origin:Dong Guan,China

Tungsten Carbide Costomized Mould Core Pin Ejector Pin Mirror-Polished Punch Die Punch Pins Tungsteen Steel is widely used as tool material, such as turning tool, milling tool, planing tool, drill bit, boring ...

Brand Name:HUIXIANG

Model Number:C47

Place of Origin:China

Guangdong made Tungsten Carbide Die Punching Pins Ejector Punch For Stamping Moulds Company Profile PPT.pdf Product Detail Material S136 Hardness 50-58HRC Heat treatment Available ...

Brand Name:Yansong

Model Number:PM056

Place of Origin:Dongguan, China (Mainland)

Yansong team located in Dongguang China , Precision Punch Corporation, offers a complete line of nonstandard punch OEM machining Service and has the engineering expertise and experience to provide “special” and “custom” tooling and punch blanks for our ...

Brand Name:Sanxin

Place of Origin:China

Model Number:SX1151

... that require precise and controlled punching or perforation. The presence of a hole in the needle allows for specific functions and applications. Applications: Fabric and Textile Industry: Used for creating perforations, ...

Brand Name:OED or OEM

Model Number:Puching seat

Place of Origin:China

...Tungsten Carbide Up Punching Molds Seat Polished Mold Parts​ Outer diameter 45mm +0.05mm Innder diameter 16mm -0.005mm Height 30mm +0.2mm The roughness of inner diameter Ra 0.1 Polished inner diameter for precision mold parts. we specialized in producing Punches, Ejector Pins and sleeves, Die Buttons, Bushes, Ejector Punches, Drill Rods, Ball Cages, Springs,Block Sets of many different standards Cemented carbide...

Brand Name:Zhenfang

Model Number:YG11,YG15,YG16,YG20C,YG22C, YG25C,GT5

Place of Origin:China

... 5. Auto components Features: Tungsten carbide cold heading die used for cold heading and cold punching standard parts,bearing, screws and nuts etc. With high impact resistance, toughness and wear resistance. Tungsten carbide cold heading/forming dies are

Brand Name:RI XIN

Model Number:YG11,YG15,YG20,YG16C,GT55

Place of Origin:China

Tungsten Carbide Cold Punching Mould ,Tungsten carbide cold heading dies Description: 1.Widely used as cold punching mould and forging mould. 2.Non-standard sizes of carbide pellets based on customer requests. 3.All carbide pellets are strictly inspected...

Brand Name:LIAN XIANG

Place of Origin:ChengDu China

...Tungsten Carbide Cutting Tips Pin HRA 92 wear resistance Tungsten Carbide Wear Parts Product Parameters Dimension: Dia 3mm, 4mm, till 25mm with length 5mm, 8mm, 10mm, till 330mm, cut to length Cutting amgles: 30°, 45°, 60°, 90°, 120°. Or Based On Requirement Material: 100% virgin tungsten carbide...

Brand Name:SUVEC

Model Number:Tungsten Carbide Inserts

Place of Origin:China

... form, tungsten carbide is a fine gray powder, but it can be pressed and formed into shapes for use in industrial machinery, cutting tools, abrasives,armor-piercing rounds, other tools and instruments, and jewelry. Tungsten carbide is approximately two

Brand Name:Kinyet

Model Number:Header Punches

Place of Origin:China

Tungsten Carbide Header Punches for High Wear Resistance in Cold Heading Industry Application Field Tungsten carbide header punches are widely used in the production of screws and similar components. Product Details — Header Punches Surface Roughness: RZ...

Place of Origin:Zhuzhou

Brand Name:Hong Yang / OEM

Model Number:Tungsten Carbide Die - 05

... for nut wear resistant or impact resistant dies 5, use for nut forming die and high impact-resistant die 6, use for punching dies Specification CO: 3%-23% Wc particle size: 0.4

Brand Name:N&D

Model Number:Pins

Place of Origin:Guanghan

ODM OEM YG6C/YG8C/YG11C Customed Grinder Rotor Tungsten Carbide Pins For Mixing High Wear Resistance Product Description Suitable for grinding of different viscosities from micron to nanometer, which improves the effect of dispersing and grinding. Mainly ...

Brand Name:OEM

Model Number:customized

Place of Origin:Zhuzhou City, Hunan Province, China

Tungsten Alloy Bolt header Punching Pellets Wear Resistance Carbide Balls Product Description Carbide balls mainly include rough balls, fine grinding balls, punching balls, bearing balls, valve balls, non-magnetic balls, Monel balls, through-hole balls, metering balls, scratching balls, and ball balls for pens. Cemented carbide...

Brand Name:XINPIN

Model Number:K10/K20/YL10.2

Place of Origin:China

hard alloy metal tungsten carbide bar for punch and dies Grade Chart Grade Density(g/Cm3) Hardness(HRA) T.R.S(N/mm2) Recommended Cutting Applications Proposal for welding XF6 ...

Brand Name:PM

Stacking Ejector Pins TYPE A-1 High performance cemented carbides for molding；Standard Specification For Square Material and Standard Specifications Of The Rings. Also we can produce the your drawing of ring. 100% raw material; Hip sintered, high hardness...