two component polyurethane blend polyols

Place of Origin:China

VP-IR04 blend polyols and isocyanate react to be foam with good flame retardant performance,good insulation effect, light quality, higher compressive strength. The blowing agent is HFC-245fa as environmental friendly blowing agent.The products are widely ...

Brand Name:Joyway

Model Number:JYW-102

Place of Origin:Shandong, China

... Polyether Polyol, silicone surfactant, catalyst, water etc. HCFC- 141, full water, methyl formate and CP can be used as blowing agent. JYW-...

Brand Name:EXCEEDCHEM

Model Number:S3102

Place of Origin:China

Polyurethane Rigid Foam Integral Skin Foam for Soft Seats Materials Blend Polyol Isocyanate for Soft Seats Description Integral Skin Foam Component A material (POLY) is polyether polyol mixing additives. Foaming Parameter Item Index CT cream time/s 20-25 RT stop foaming time/s 60-80 FBD free foaming density g/cm3 130-160 Operation Instructions Before use, thoroughly mix Component...

Brand Name:HIGHTOP

Place of Origin:China

...Component Polyurethane Chemical in 55 gal Drum For Waterproof Description of Two Component Polyurethane foam Chemical It is a light yellow liquid at room temperature. It has been developed to produce B1 class fireproof outer wall spraying thermal insulation.The product is a mixture consisting of polyether polyols, silicone stabilizer, flame retardant and catalys. polyurethane foam polyurea material. lt is a fully formulated polyol blend

Brand Name:LIHONG

Model Number:Water Soluble Polyurethane Grouting Fluid Material

Place of Origin:China

... polyether polyols and Isocyanate. The material reacts with water to form an elastic colloidal solid, thus achieving a good water-stopping effect. It is a new high-...

Brand Name:Chang Feng

Model Number:Chang Feng

Place of Origin:An Ping China

... is 100:25 2. Parameter table Two-component polyurethane adhesive for machine component proportion ratio is 100:25 Material-A Material-B Weight Small barrel :25KG 6.25KG Big barrel :50KG 12....

Brand Name:MC

Model Number:MC-PU90A/B

Place of Origin:CHINA

...-terminated polyurethane prepolymer. It has excellent processing properties, short gel time, solid in common temperature. The finished product has good properties of abrasion ...

Place of Origin:China

Brand Name:Jiu ri

Composition: This product is performed polymer which based on polyether polyols and isocyanate, which is colorless or light yellow viscous liquid.(based on polyether polyols and TDI) Application It applies to make rubber tiles, which is used for paving ...

Brand Name:HAOBANG

Model Number:Single-Component

Place of Origin:Shandong,China

... polyol as key ingredients, along with assorted additives and fillers. This non-dripping coating, comparable to Likfix, achieves consistent thickness upon single-time ...

Brand Name:WeiLi Resin®

Model Number:SE6770

Place of Origin:China

... two-component polyurethane coatings when mixed with aliphatic isocyanate curing agents. Key Characteristics Hydroxyl Content: The 3.0% hydroxyl content provides good reactivity, ...

Brand Name:PLYFIT

Model Number:A0101,A0102,A0104

Place of Origin:Guangdong, China

...Polyurethane Foam Pu Sealant For Windshield B2 grade Place Of Origin Guangdong,China Size 310ml Colour White Main Ingredient Polyether polyol, dioctyl phthalate Application Automobile, home improvement, construction,sealing Wide range of applications, including: mounting, sealing, filling and insulating General purpose one-component polyurethane...

Brand Name:Bosch Rexroth

Model Number:A7VKO028

Place of Origin:China

A7VK Axial piston variable pump , Metering pump for polyurethane components Hydraulic fluids The pump is approved for pumping and metering polyurethane components (polyol and isocynate). For other hydraulic fluids, consult with Bosch Rexroth Service. MA ...

Brand Name:MOER

Model Number:PU-30F

Place of Origin:China

...Polyurethane PU Injection Machine (Suitable for PU panel air filter , PU round air filter.) Technical Parameter Overall Output 15-45g/s Moving Speed 2-10m/min Overall Power 8KW Power Supply 380V/50HZ M/C Weight 1000kg M/C Size 1500*2000*2100 Design Mixture Ratio: A:B 100:25-35( customized) Feature Working Principle The polyurethane injection machine adopts a two-component mixing injection system. Polyether polyol

Brand Name:BEECORE

Model Number:No

Place of Origin:China

High Viscosity PU Adhesive J301 For Composite Material Two Component 1. Descriptions: • BEECORE PU adhesive J301 is two-component adhesive, mainly used for bonding honeycomb panels, corrugated board products, etc. • BEECORE adhesive J301 is a two-component...

Brand Name:WEMET

Model Number:WEMET-PU-01

Place of Origin:CHINA

... technology of online automatic microcomputer operation(SIEMENS) in the world, making WEMET first succeed in the online continuous foaming technique of multi-component PU. The production line may complete proportioning and blending only one time at

Brand Name:YOCHON

Model Number:YC-AC-181218-27(YC9520)

Place of Origin:Anhui(China)

... polyester resins can be synthesized by using different polyacids and polyols. The main use is in the paint industry. Its advantages are strong adhesion, good physical and mechanical properties, good chemical resistance, alkali ...

Brand Name:FUTURE

Place of Origin:CHINA

...component specially designed for polyurethane foaming equipment, suitable for precisely regulating the mixing and spraying of foam raw materials. This valve is made of chemically resistant materials and can withstand the long-term erosion of isocyanates (ISO) and polyols (Polyol) in polyurethane raw ...

Brand Name:HongFeng

Model Number:950mm & 1150mm

Place of Origin:Hangzhou,China

... and refrigerated display counters. It consists of partially and fully formulated polyol blends containing all the raw materials and auxiliaries necessary for foaming. PU sandwich panels is a kind of board used for enclosing structures, which has

Brand Name:SDONG

Model Number:SB02-601

Place of Origin:Guangzhou, China

... polyurethane bond poured-in-place track surface with an EPDM rubber embedded broadcast finish. Process: The cast polyurethane resin is prepared by mixing two components, one a liquid polyol and the other an isocyanate in correct proportions, add SBR