underground mining tool tapered button bit

Place of Origin:China

Brand Name:Jinquan

Model Number:Threaded & Tapered

..., road, gas line, pipe and trench projects, quarry work, rock anchoring and ground stabilization projects, water well industry, etc. Taper Degree: 6°, 7°, 11°, 12° Diameter: 30mm, 32mm, 33mm, 34mm, 36mm, 38mm, 40mm, 41mm,

Brand Name:SOLLROC

Model Number:32mm-55mm

Place of Origin:China

Tapered Drilling Tools Tapered Button Bits Drill Bits For Small Hole Drilling Product specifications: Diameter: 28mm-55mm Degree: 4°,6°,7°,11°and 12° Type: Chisel bit, Cross bit and Button bit Skirt: Short or Long Skirt Diameters: Tapered chisel bits:20/22/28/30/32/34/36/38/40mm Tapered cross bits:24/26/28/30/32/33/34/35/36/37/38/40/42/48/50/55mm Tapered button bits...

Brand Name:MTH

Model Number:38mm

Place of Origin:CHINA

...Tool Tapered Button Bit 38mm 11 Degree Description: Tapered drill bit work with the pneumatic rock drill and tapered drill rod together, to carry out drilling work by tapered connection with rod. We manufactuer various tapered button bits in different degrees as below: Bit diameter: 26mm to 60mm; Tapered...

Brand Name:HZJX

Model Number:3 3/4 "(95.3mm)~26"(660.4mm)

Place of Origin:China

... quarring and underground drilling. Main Features 1) High quality; 2) High resistance; 3) High footage speed; 4) Very low breakage; 5) Very low percentage of carbide ...

Brand Name:MIROC

Model Number:Button Drill Bit

Place of Origin:China

...longer service life,better wear-resistance and impact-resistance performance,widely used in tunneling,underground mining,open pit mining,anchoring and other large-scale construction projects. Type Thread Button Bit Material tungsten carbide Use Ore Mining,

Brand Name:MING

Model Number:MZ0738-11

Place of Origin:CHINA

...Tapered Button Bits With 11 Degree Taper For Underground Coal Mining Equipment Product category: DTH taper drill bit Matched connection: 11 degree taper Diameter: 38mm KINGDRILLING DTH taper drill bit description: A tapered drill bit is a drill bit used for rock or geological exploration drilling. They are usually made of high-speed steel or tungsten steel and have a tapered design for tapered drill pipes. Tapered...

Brand Name:QIDELI

Model Number:H22/H25

Place of Origin:PUTIAN FUJIAN CHINA

...buttons taper drill bits cold pressing and hot set type button bits PRODUCT INTRODUCTION Tapered Button Bits is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground drilling. 1. Our button bits is made with supper quality carbide and aloy steel. 2. After our mature heat treatment process, the performance of the product has reached the best state.Our bits...

Brand Name:MIROC by KSQ

Model Number:12 degrees Tapper Button Bits

Place of Origin:CHINA

...Button Bits Tapered equipment affords drillers the ability to change drilling bits whilst still using the same drilling rod. Drillers choose tapered button bits for faster drilling penetration rate. Different taper sizes have different characteristics when it comes to the “knock-off” index – the smaller angle will prevent the bit from spinning. Application • Dimensional Stone Industry • Underground

Brand Name:OED/OEM

Model Number:7 degree/11°/12°/4°

Place of Origin:China

12 degree 40mm 45mm Tapered Chisel Bit Small Drill Bit 35CrMoV for Underground drilling Mining Feature of the taper Chisel bit: Tapered Chise Bit is suitable for mining,quarring,tunneling and so on. It is widely used for gound quarring and underground ...

Brand Name:Jinzen Drills

Model Number:Rock Drill Spare Parts

Place of Origin:China

...Tools Thread Button Bit, Taper Drill Bit, Cross Bit, Chisel Bit​ Jinzen Drilling product range covers 1.Down the hole(DTH) hammer and bit, 2.Drill pipe(drill rod) 3.Top hammer rock drilling tools(thread button bit, drill rod, shank adapter) 4.Small hole drilling tools(tapered button bit, tapered drill rod, plug hole integral drill rod, integral drill rod),and other rock drilling tools...

Brand Name:JCDRILL

Model Number:36mm

Place of Origin:China

... bit as long hole bit to use taper match with jack hammer bit with rod to be used for air leg or hand held jack hammer driller in quarrying, and mining. Tapered Quarry Button Rock Drill Bits 40mm 41mm 45mm With higher strength of tungsten carbide as the

Brand Name:SUVEC

Model Number:tapered drill button bit

Place of Origin:China

...drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized tapered button drill bits according to different drilling environment,applicable to drill soft rock,

Place of Origin:China

Brand Name:SANSUNG

Model Number:Taper Button Bit

Tapered button bits is ideal for short hole drilling, as well as roof bolting applications. Comparing with tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency, so...

Brand Name:Super Diamond

Place of Origin:China

Tapered Button Bits Rock Drilling Tools Fast Penetration For Blast Hole Drilling Product name thread button bits rock button bits Material Alloy steel and tungsten carbide Color depend on customers' requirement Thread R25,R28,R32,R38,T38,T45,T51,T60,ST68 Diameter 34mm-127mm Button bit shape Ballistic and Spherical Face shape Drop - center shape and Flat shape Application Rock quarry, granite, limestone, basalt Button bit...

Brand Name:GLORYTEK

Model Number:T51-115mm

Place of Origin:China

...buttons. Our thread button drill bit size from 33mm-178mm, include thread type H25, R25, R28, R32, R38, T38, T45, T51, ST58, ED58 etc for kinds of button bit, reaming button bit, retract button bit, drop centre retract button bit. The button shapes of our

Brand Name:New Diamond

Model Number:T45

Place of Origin:Hunan, China (Mainland)

...tapered chisel bits and tapered cross bits, button bits has higher technology, much longer primary drilling time and higher drilling efficiency. According to the tungsten carbide insert, tapered button bits can be divided into the types of hemispherical, conical andparabolic button, etc. Thread button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools