vde 0620 lehre3 plug and socket

Place of Origin:China

Brand Name:BONAD

Model Number:BND-VDE-0620-1

... andappropriate steel with a hardness of at least 60 HRC and roughness according require to standard require. Each gauge is supplied with a certificate of calibration. We also sell: VDE DIN 0620-1

Brand Name:JLX

Model Number:LX-6216e

Place of Origin:Made in China

...VDE 0620-1 Lehre 16e Socket Gauge with 18N Lehre 16e – Examining Largest Withdrawal Force of Contact Socket of Plug According to DIN 49441 form R2 Lehre 16e – Lehre zur Prüfung der größten Abzugskraft der Kontaktbuchse des Steckers nach DIN 49441 Form R2 Germany plug and socket gauge is strictly designed and manufactured according to the relevant standard requirements of VDE0620-1:2010. This plug and socket...

Brand Name:KingPo

Place of Origin:China

VDE 0620 Germany Plug Socket Tester For Dimensional Measurement VDE 0620 Germany Plug Socket Tester For Dimensional Measurement And Verification Of Plug Socket Of Household Appliance Product information: These measuring gauges confirm to the standard of VDE0620, which are used for the dimensional measurement and verification of the plug socket...

Brand Name:kingpo

Model Number:DIN VDE 0620-2-1 :2021-Bild 16a

Place of Origin:china

...VDE 0620-2-1 :2021-Bild 16a Test plug for temperature rise According to DIN VDE 0620-2-1 (VDE 0620-2-1):2021-Bild 16a DIN-VDE0620-1 plug and socket gauge Figure number Project name Number DIN-VDE0620-1-Lehre1 Socket R gauge (5.0,5.8,6.0) 3 DIN-VDE0620-1-lehre2 Minimum opening width and minimum pull out force of contact jack 2 DIN-VDE0620-1-Lehre3 Bipolar plug force 1 DIN-VDE0620-1-Lehre4 Bipolar plug...

Brand Name:Sinuo

Model Number:SN2101-4

Place of Origin:China

...Plug And Socket-Outlets General Required VDE Gauges Standards & Clauses: The measuring gauges are required by IEC60884-1:2013 & DIN VDE 0620-1:2010 Gauge List. Technical Parameters: No.: Figure No. Name QTY 1 DIN-VDE0620-1-Lehre1 Socket jack R size gauge (5.0, 5.8, 6.0) 3 PCS 2 DIN-VDE0620-1-Lehre2 Minimum opening width and minimum withdrawal force of contact socket 2 PCS 3 DIN-VDE0620-1-Lehre3 Insertion force of bipolar plug

Brand Name:SHC

Model Number:SC-VDE-Lehre 6789

Place of Origin:China

... gauge is strictly designed and manufactured according to the relevant standard requirements of VDE0620-1:2010. This plug and socket test gauge is mainly used to test and inspect whether the structure and size of plugs and sockets conform to VDE0620-1

Brand Name:HongCe

Model Number:HC9917

Place of Origin:China

... is used for test the firmness of the plug wire and electrical accessories. Test sample: Non-rewirable plug and socket-outlet, rewirable plug and socket-outlet Feature: In according with standard requirements. To test the firmness of the plug wire and