water based release agent non flammable

Brand Name:Lubekote

Model Number:xxxxx

Place of Origin:China

...Water Based Release Agent for Antivibaration Sealing Multiple Release Our Lubekote release agents can be used for damping, sealing and other molding molds, tire molds, track molds, excellent performance, saving process time and extending the cycle of mold cleaning and replacement Permanent Water Based Release Agent Advantages: Easy to use Eco friendly Prevents build up on the molds Extending the cycle of mold cleaning Excellent release

Brand Name:EXCEEDCHEM

Model Number:Water Based Release Agent

Place of Origin:China

... Chemical Composition: The water based release agent for shoe Sole is made by special silicone oil, wax liquid and surfactant by special process. 2. Properties Item Index Appearance Milky ...

Brand Name:Qiantai Chemical

Place of Origin:Guangdong, China

Wax emulsion is a cationic/non-ionic oil-in-water emulsion of paraffin/polyethylene wax. It possesses reactivity and film-forming properties, along with excellent stability, lubricating performance, and fabric softening properties. It can effectively ...

Brand Name:Kanglibang

Model Number:CL-T10B

Place of Origin:Guangdong, China.

... effect and would not transfer to the products itself. Over 5 times long-term using, also can be used as cleaning agent in the releasing process. Mainly apply to silicon rubber producing, especially for high quality requested silicone rubber releasing from

Brand Name:Guangzhou Xingjin Fire Equipment Co.,Ltd.

Model Number:40L/70L/90L/100L/120L/150L

Place of Origin:Guangzhou, Guangdong, China

... compositions, specifically including HFC-227ea, HFC-125, and HFC-134a. These agents are non-flammable, insoluble in water, and have a specific gravity of 1.2 G/cm3. Fire Suppression Agents are designed to be used as fire extinguishing agents, and can

Brand Name:LANSEN CHEM

Model Number:LSC-500

Place of Origin:CHINA

...Release Agent for Rubber Product Demolding Product Description: This product is a water-based calcium stearate suspension prepared via a proprietary process. As an outstanding anti-adhesive agent, release agent, and anti-sticking solution, it is ideally suited for rubber and plastic products. This is the LSC - 500 non - ionic calcium stearate white emulsion rubber release agent. As a specialized release agent

Brand Name:JOYWAY

Model Number:PU-5074

Place of Origin:China

...Release agent PU-5074 Mould release agent water base for the shoe sole for the upper mould Characteristic: PU-5074 is a emulsion formed by mixing siloxane and silicone resin. Mainly used for polyurethane soles, self-crust, hard foam and other products, dry surface, light Natural, good alcohol solubility Physical property: Item Data Appearance White liquid Solid content 28% Density About 1.0 PH 7.0-8.0 Emulsifying agents nonionic Diluent Water

Brand Name:HILHELM

Model Number:plastic paint

Place of Origin:China

...drying anti-scratch matte A variety of performance decorative and protective substrates, good adhesion of the paint film, fine texture, Water-based environmental protection, non-toxic and non-flammable, It is a good choice for cost-effective coating on the

Brand Name:WeiLi Resin®

Model Number:WQ-W40

Place of Origin:China

Water Resistane And Anti-Sticking Wax Dispersion For Water-Based Ink And OPV WQ-W40 Wax Dispersion Introduction WQ-W40 is a synthetic wax dispersion emulsion with 40% solid content. It is recommended to be used in water-based coatings to improve the slipperiness, anti-sticking and water resistance of products. It can be used as a lubricant and softener for yarns in the textile industry; water-resistant agent and mold release agent...

Brand Name:PLYFIT

Model Number:D0201

Place of Origin:Guangdong

...wear-resistant compound raw materials, and selected premium non-toxic environmentally friendly products as the propellant; 2.) Good finishing of the product surface, not greasy, mold releasing for many times, cost savings. Mold release agent: Applicable to

Brand Name:JUNHE

Model Number:1353

Place of Origin:Changzhou in China

...Release Agent / Zinc Phosphate Pretreatment 80-120 Zinc Stearate Release Agent Introduction Zinc Stearate Release Agent consist of organic acid, non-ion surface active agent and zwitterion free from phosphor and nitrogen. Bath solution compound: Put cold water into the tank till three-quarter with appropriate degreasing agent, then stirring, after, add sufficient water...

Brand Name:DAHUA

Model Number:ANCAMIDE 2839

Place of Origin:guangdong

...Agent Purity: 99% Application: Metal Protective Coatings Appearance: Yellow Liquid Colour Gardner: Max 10 Viscosity @ 25°C: 7600 Amine Value: 305 Non-volatile(wt%): 80 Volatile(PM)(wt%): 1.08 SG@25℃[g/ml: 1 AHEW /[H: 1 Recommend Use Level (PHR): 50-60 Highlight: Modified Polyamide Curing Agent , Water Based Polyamide Curing Agent , Polyamide Curing Agent...

Brand Name:CLLZY

Model Number:pva-005

Place of Origin:JIANGSU, CHINA

... system used to make composites parts but is soluble in water. It is particularly recommended as a parting agent for separation between polyester or epoxy resins and various mold surfaces but may be used with most thermoset resins. PVA release film is not

Brand Name:ATET

Place of Origin:CHINA

Dispersant MF can be dissolved in concrete as a strong water-reducing agent Dispersant MF is acid-resistant, alkali-resistant, heat-resistant, hard water-resistant, and inorganic salt-resistant, and can be used simultaneously with anionic and non-ionic ...

Brand Name:Hongshun

Model Number:HS-25DAC

Place of Origin:Dongguan

Die-casting Aluminum Cleaning Agent Remove The Release Agents Oil Oxidation Spots And Dust The die-casting aluminum cleaning agent is a water-based cleaning solution scientifically formulated with a variety of imported surfactants, corrosion inhibitors...

Brand Name:DR

Model Number:DR-270

Place of Origin:Made in China

...Agent For Water Based Coating Wetting agent DR-270 is a polyether-modified silicone copolymer wetting agent,with excellent anti-pitting properties in water-based,solvent-based, and radiation-cured coatings, and improves substrate wettability. Specification: Item Value Chemical Component Polyether-modified silicone copolymer Appearance Light yellow transparent liquid Viscosity, (25 °C ) 50-100mPa·s Non

Brand Name:WeiLi Resin®

Model Number:WL-AC040

Place of Origin:China

It is a water-soluble modified polyamine adduct, recommended to be used with water-based epoxy resin, designed for anti-corrosion primers for various metal substrates and epoxy floor paints. Physical Property: Item Value Testing Method Appearance Light ...

Place of Origin:Japan

Brand Name:Shin etsu

Model Number:Shin etsu Km-740t

Shin-Etsu KM-740T Rubber Resin Release Agent Silicone Emulsion Product Properties Property Value Appearance Creamy white emulsion Non-volatile content 39% (at 105℃×3h) Base fluid viscosity 350 mm²/s (25℃) Ionic character Nonionic pH value N/A (Not ...

Brand Name:allesd

Model Number:SR0302

Place of Origin:China

Non Toxic PVC Cleanroom Sticky Roller Dust Removal Pad Water Based Acrylic Adhesive Description: With PVC based sticky pad, it's higher performance in dust removal ability It can remove dust, particles more easier and efficient, and pick up dust and contamination size below 2µm Made by environment-friendly water based acrylic adhesive, it's non-toxic, flat and even, no degumming when strength friction. No worry of release...