wellhead pressure control equipment wpce

Brand Name:ZZ TOP OIL TOOLS

Model Number:Hydraulic Tool Trap

Place of Origin:China

WPCE Manual Tool Trap The tool trap is a safety device of wireline pressure control equipment. The Tool Trap is normally installed immediately above the wireline BOP. The purpose of manual tool trap is to retain any wireline downhole equipment that maybe ...

Brand Name:Techcore

Model Number:FZ6-35 Wireline BOP

Place of Origin:CHINA

... seal the wellhead in the coiled tubing working, and located on the surface oilfield between wellhead an lubricator. The wireline BOP provide blowout protection during the wireline operation and slickline operation. The wireline BOP / Wireline valve is

Brand Name:JC Wellhead

Model Number:13 5/8" x 5000psi Drilling Spool

Place of Origin:China

... work.The spool is made of alloy steel and heat-treated. It is used on the oil and gas well which is with a pressure of less than 105Mpa. It is tested according to ((SY/T5053.1-2000 BOP and control equipment, BOP)) before shipping to be used safely. The

Brand Name:Ruixin

Model Number:0.125inch

Place of Origin:China Baoji

Wireline Clamp Wellhead Wireline Pressure Control I.Introduction: The wire clamp (wire clamp/cable clamp) is a tool for temporarily clamping the wire/cable when lifting the blowout pipe at the wellhead. It is often used to clamp steel wires or cables on ...

Brand Name:Lake

Model Number:All models

Place of Origin:China

API 16A well control equipment annular BOP/blowout preventor Product Description API 16A Annular blowout preventer is manipulated by hydraulic control system. When it is shut off, high pressure oil flows into piston underside closed cavity through the oil ...

Brand Name:Hebei Pantu

Model Number:YG21

Place of Origin:China

... drilling .the Choke Kill Manifold is applicable for controlling casing pressure by use of pressure relief and blowout,and for maintaining the pressure balance inside the well bore and hence protecting the wellhead.the kill-line manifold is applicable for

Model Number:FKQ Series

Place of Origin:China

...) stacks is special equipment, which is used to control BOP, hydraulic chock, kill system and diverter equipment, and indispensable equipment for blowout preventer during drilling or workover in petroleum and natural gas industry. The function of the

Brand Name:HUIFENG

Model Number:WCP-70

Place of Origin:China

...safety valve, downhole safety valve, wellhead control panel, RTU data acquisition control, and power supply system.The control panel uses hydraulic oil (manual pump/electric pump/pneumatic pump pressurized input hydraulic oil) as the driving medium for the

Brand Name:Ruitou

Model Number:All Size

Place of Origin:Shanghai

...Control System bottles for accumulator wellhead BOP Control Unit Company :Shanghai Ruitou Petroleum Machinery CO.,LTD Email: Yanni@ruitouoil.com Phone:+86 15900488030 Bop Remote control system is special equipment, which is used to control BOP, hydraulic chock, kill system and diverter equipment, and indispensable equipment...

Brand Name:CSPPM

Model Number:PPM-T230E-222

Place of Origin:China

...places or working conditions. It uses imported premium materials and advanced MEMS technology to process into an integrated pressure core, which is equipped with a precision processing circuit. The temperature signal can be compensated, and it can output 4

Brand Name:SDA

Model Number:JT4DSY-250/8

Place of Origin:China

...factory who begin to make the triplex pumps, we can supply all kinds of the hydro test pumps for the valves,pipeline,tanks pressure testing. widely used in oil refiney factory,oil transporation,and some valves manufacturing factory. our products have been

Brand Name:XBSY

Model Number:ZSCQ

Place of Origin:Chengdu, China

... the oil associated gas returning to mud from the wellhead and the gas in the invaded mud, which ensures the appropriate mud weight during drilling process and effectively prevents blowout from occurring. The jet vacuum ...

Place of Origin:China

Brand Name:ATO

...tem. The mud gun are classified into three kinds: low pressure; medium pressure; high pressure, mainly to match with centrifugal pump,or mud pump, or the shear pump. It is to clean the wall tube and to prevent the mud sediment in the mud ...

Place of Origin:Jiangsu, China (Mainland)

Brand Name:WONDERY

Model Number:VPI2800*3500mm

PLC Controlled Vacuum Pressure Impregnation Equipment VPI 2800 * 3500 mm Introduction High vacuum pressure impregnation equipment is the key equipment for insulation treatment of high voltage motors, special anti-explosion motors, and transformers. The ...

Brand Name:SHQN

Model Number:Api Wireline Flow Tube

Place of Origin:Shanghai, China

... FLOW TUBES are changed frequently in order to properly contain well pressure as the wireline is raised and lowered into the well bore.We offer a full range of WIRELINE FLOW TUBES at very attractive prices.We invite your direct requests and ...

Brand Name:SSEDU

Model Number:ZM7150

Place of Origin:China

ZM7150 Training System: Pressure Control experimental unit for control engineering experiments pressure control in a tank speed controlled diaphragm gas pump electronic pressure sensor solenoid valve to generate disturbance variables process schematic on ...

Brand Name:HongCe

Model Number:HH0806

Place of Origin:China

...Equipment - High-Pressure Watertight Test Chamber, Precision Pressure Control for Reliable Waterproof Validation Product Introduction for IP Testing Equipment Compliance Standards: IEC 60529: "Degrees of Protection Provided by Enclosures (IP Code)" for IPX8 compliance, assessing the enclosures' and seals' capability to sustain operational performance of equipment...

Brand Name:TR SolidsControl

Model Number:TRG20A-055

Place of Origin:Xi'an,China

...Control Equipment– TR SolidsControl Product Description Screw pump is an ideal pump for feeding to decanter centrifuge. The main parts are screw shaft and screw shaft bushing.It can drive by coupler, or adjust the speed by using variable speed motor, triangle V-belt and gear box etc. Advantage • Device Stability:Because of special geometry shape of these two parts, the pump forms pressurize