wind turbine lidar optical head

Brand Name:MOVELASER

Model Number:Molas 3D

Place of Origin:China

... measurement. Its working principle is shown in Figure 1. The pulse signal light generated by the fiber laser is transmitted to the air to be measured through an optical antenna (telescope and scanner), and interacts with the aerosol particles therein

Brand Name:Guangda

Model Number:3MW 3.2MW 3.6MW 4MW 4.5MW 5MW 5.5MW 6.25MW 7MW 8MW 8.3MW 11MW 12MW

Place of Origin:Jiangsu China

Wind turbine Nacelle Elbow 2-12MW QT400-18AL Wind turbine Castings EN-GJS-400-18 Nacelle head carrier of wind turbine connected to the tower and support the whole nacella structure . Nacelle head carrier is casting structure ,the material is nodular cast iron,which has good performance of vibration absorption Wind turbine castings Description Application Wind...

Brand Name:medenstar

Model Number:HPA0012(W)

... spray Working Air Pressure:0.20-0.25MPa(0.22MPa prefrred) Rotation Speed:350,000-400,000R.P.M(Standard Head); 280,000-320,000R.P.M(Torque Head); Bur Applicable:Φ1.595-1.600mm Features: 1.

Brand Name:DORIT

Model Number:DR-189

Place of Origin:China

...Head Push Button High Speed Air Turbine Fiber Optic Handpiece Kavo type fiber optic pieza de mano dental Technical Data Model DR-189 Brand DORIT Bur Applicable Φ1.59mm-Φ1.60mm Rotation Speed 300,000~420,000rpm Head Diameter Φ12.5mm(torque)/ Φ11.2mm(standard) LED Type Fiber optic...

Brand Name:JURONG

Model Number:JR-CVPS15G

Place of Origin:CHINA

Offshore Wind Turbine Pile Cleaning Equipment Underwater Washer Underwater Cleaning Machine Model JR-CVPS15G-2020 Power 24hp Power Producer gasoline Voltage 380V/400V/440V Pressure 200bar Flow 2400L/H Pump head Stainless steel316 Size 100*75*80cm Weight ...

Brand Name:Lang Tai

Model Number:MG

Place of Origin:Changyuan, China

Product introduction of Mg type general gantry crane product description: Advantages of the tyre crane: The tire gantry crane is mainly used for lifting track plate, sleeper, formwork, rail bar, rail and fork road in the construction of ballastless track...

Brand Name:LJ

Model Number:LJ-PF

Place of Origin:Luohe China

... foundation for the turbine. Our bolts are made of high-grade carbon steel for superior strength and durability, with a yield strength of 250-1000MPa. A variety of head types are available, including hex, round, and square. The bolts are packaged in

Brand Name:Wawushan

Model Number:ZDJP-061

Place of Origin:China

... sides of the turbine towards the centre (radial entry) and then turns in a downward direction to push the blades of the turbine to do work. Place of Origin: Sichuan, China Brand Name: Customized Warranty: 1 year Application: Hydropower Plant Certificate:

Place of Origin:CHINA

Brand Name:Dongfeng Electric

... and Pumped Storage Hydro Generator Set with unit capacity up to 150 MW, and conventional steam turbine, TRT, gas turbine, cogeneration steam turbine generator set of unit capacity up to 60 MW , and wind turbine generator set of unit capacity from 1 MW to

Brand Name:NSK

Model Number:X95L

Place of Origin:CHINA

NSK Dental Turbine HandpieceFiber Optic Ai-Max X95L Dental Led Contra Angle 1:5 Increasing Micromotor Product Details of Dental Turbine Handpiece 1. Max speed 200.000 RPM 2. Imported ceramic bearing,long lifetime,More stable and more faster during treament...

Brand Name:SPR-ing

Model Number:SP025

Place of Origin:Shenzhen

...Optic Slip Ring with a lead length of 300mm is a high-speed and long-life solution designed for stable signal transmission on testing platforms. This slip ring is ideal for various applications that require reliable and uninterrupted data transmission, such as slip rings for wind turbines and slip rings for robotics. The product, named "High-Speed and Long-Life Fiber Optic...

Brand Name:ENNENG

Model Number:PMG

Place of Origin:China

...% Cooling Method Natural cooled Ambient temperature -25~45℃ Recommended altitude ≤ 1000m Bearings SKF Ball Bearings Winding material 100% Copper Winding temperature level 180℃

Brand Name:YUSENDENT

Model Number:CX207-G-TP

Place of Origin:Guangdong, China (Mainland)

...-GK-TP CX207-GK-TPQ Bearings: myonic Brand Bearings. Made In Germany. with good quality, low noise and durable. Turbine: All turbines are Dynamically balanced by Germany Balancing Machine. Well balanced turbine Durable and quiet.

Brand Name:Finer

Model Number:H-45°01

Place of Origin:China

... Triple water spray Speed ≥320,000 RPM Light Fiber optic Bearing Ceramic bearing Chuck type Push button Bur applicable 1.59-1.6 mm Head size 11.2 * H13.5 mm Compatible with KAVO Multiflex Coupling (1) The high speed handpiece is

Place of Origin:Zhejiang, China

Brand Name:ALS

Model Number:FS-114S

... Light Can be used without fiber optic system Back siphonage prevention sanitation handpiece Push button/wrench chuck system Technical Data: Speed: 25000-35000R.P.M Air consumption: ...

Brand Name:Joyfuncade

Model Number:LC-VR-2MLHD2

Place of Origin:China

... Space-time battleship appearance, dynamic turbine lights attract surrounding consumers √ Modular design, easy installation and disassembly √ Removable anti-winding mechanism on the top of the head, so that the experience process is not disturbed by ...

Brand Name:SAMYON

Place of Origin:CN

Model Number:FFBG

Femto Fiber Bragg Grating Bear High Temperature Battery Management Wind Turbine Specification: The Laser is focused into the core of the fiber and induces local refractive index changes in a point-by-point writing process. The process is highly nonlinear...

Brand Name:Okaf

Model Number:OK-TK36

Place of Origin:China

Long Range Thermal Imaging Camera Dual Sensor Outdoor PTZ Camera Observation Specifications: 1. Support PTZ self-locking, wind resistance. 2. Support start at -40 °, can be used in cold areas, frost and dust proof. 3. Horizontal 360 ° continuous rotation...

Brand Name:tiansheng

Model Number:150type

Place of Origin:China

...Winding Machine technical parameter paper layer 2-12 plies PLC controller Special products Inner diameter of tube 30-150(mm) Interface Special products Thickness of tube 1-8(mm) Invertor ENERGY Speed 0-25(m/min) Intermediate relay/contactor Omron/Chint Fixed length mode CNC (Optical Control) Button Siemens Winding head No resistance two head...