wireline wellhead pressure control equipment

Model Number:5” ID

Brand Name:RuiXin

Place of Origin:Baoji,Chaina

... integrated well containment under harsh sour oilfield conditions. The system includes Wireline Blowout Preventer, lubricator , flanges, crossover ,fully assembled . Technical Parameters • Internal Diameter: 5” ID • Working Pressure: 10000 PSI •

Brand Name:Techcore

Model Number:FZ6-35 Wireline BOP

Place of Origin:CHINA

... seal the wellhead in the coiled tubing working, and located on the surface oilfield between wellhead an lubricator. The wireline BOP provide blowout protection during the wireline operation and slickline operation. The wireline BOP / Wireline valve is

Brand Name:ZZ TOP OIL TOOLS

Model Number:FPG14-70

Place of Origin:China

... wireline tool string into and out of the well under pressure. Normally position on top of wireline valve, lubricator comes in three section-upper, middle, lower; to provide adequate length for wireline tool string to be raised above wellhead, enabling the

Brand Name:JC Wellhead

Model Number:13 5/8" x 5000psi Drilling Spool

Place of Origin:China

... work.The spool is made of alloy steel and heat-treated. It is used on the oil and gas well which is with a pressure of less than 105Mpa. It is tested according to ((SY/T5053.1-2000 BOP and control equipment, BOP)) before shipping to be used safely. The

Brand Name:Lake

Model Number:All models

Place of Origin:China

API 16A well control equipment annular BOP/blowout preventor Product Description API 16A Annular blowout preventer is manipulated by hydraulic control system. When it is shut off, high pressure oil flows into piston underside closed cavity through the oil ...

Model Number:Inconel 718

Brand Name:DINGSCO

Place of Origin:China

... tubing while providing reliable pressure control and sealing within wellhead systems. With high strength, good corrosion resistance and excellent high-temperature performance, this nickel-based alloy tubing hanger is suitable for oil and gas wellheads,

Categories:Choke Manifold

Country/Region:china

... to handle a flow capacity of up to 5000 barrels per day (Bbl/day), this robust piece of equipment ensures precise control over production rates, protecting downstream equipment and optimizing reservoir performance. The Choke Manifold is indispensable for

Brand Name:Hebei Pantu

Model Number:YG21

Place of Origin:China

... drilling .the Choke Kill Manifold is applicable for controlling casing pressure by use of pressure relief and blowout,and for maintaining the pressure balance inside the well bore and hence protecting the wellhead.the kill-line manifold is applicable for

Brand Name:HuiChi (HC)

Model Number:BOP Parts Series

Place of Origin:China

________________________________________ Product overview: The spherical rubber core of the annular blowout preventer is the core component of the annular blowout preventer in oilfield drilling operations. It is mainly used to seal the wellhead in ...

Categories:Wireless Pressure Transmitter

Country/Region:china

...pressure gauge control equipment BPZK01 Electronic Pressure Switch Introduction: BPK-ZK01 digital pressure/differential pressure gauge is an all-digital measurement and control product that integrates pressure/differential pressure measurement, display, point control, and transmission output. It can be directly installed at the pressure measurement point on the site or mounted on the control...

Brand Name:Jinxi Pipe

Model Number:Stainless steel pipe

Place of Origin:China

ASTM A790 UNS S32520 Stainless Steel Tube For Pressure Control Equipment Specifications ASTM A790 covers seamless and straight-seam welded ferritic/austenitic stainless steel pipe intended for general-purpose applications. ASTM A790 UNS S32520 is a ...

Brand Name:SHQN

Model Number:Api Wireline Flow Tube

Place of Origin:Shanghai, China

... FLOW TUBES are changed frequently in order to properly contain well pressure as the wireline is raised and lowered into the well bore.We offer a full range of WIRELINE FLOW TUBES at very attractive prices.We invite your direct requests and assure you of

Model Number:FKQ Series

Place of Origin:China

...) stacks is special equipment, which is used to control BOP, hydraulic chock, kill system and diverter equipment, and indispensable equipment for blowout preventer during drilling or workover in petroleum and natural gas industry. The function of the

Brand Name:HUIFENG

Model Number:WCP-70

Place of Origin:China

...safety valve, downhole safety valve, wellhead control panel, RTU data acquisition control, and power supply system.The control panel uses hydraulic oil (manual pump/electric pump/pneumatic pump pressurized input hydraulic oil) as the driving medium for the

Place of Origin:OEM

Model Number:A6740 3051

Brand Name:Emerson

Emerson A6740 3051 Pressure Transmitter Module for Industrial Process Monitoring The Emerson A6740 3051 Pressure Transmitter Module is an industrial automation component designed for applications involving pressure measurement and process monitoring. As...

Place of Origin:CHINA

Brand Name:Factory-owned Brand

... of any well pressure control system. Installed at the wellhead, it serves as the primary barrier against the uncontrolled release of oil, gas, or other formation fluids during drilling, workover, well servicing, and oil testing operations. When a ...

Model Number:UP-6002

Brand Name:YOUBI

Place of Origin:CHINA

Automatic Carton Bursting Strength Tester for Carton Packaging Factory QC Inspection UP-6002 Product Overview The Automatic Bursting Strength Tester is a professional packaging material testing instrument designed to detect the bursting resistance of ...

Brand Name:MingYuan

Model Number:MY-OCM12

...equipment designed for the production of disposable paper cups. This CE-certified machine combines advanced technology with robust construction to meet the growing demands of the disposable cup manufacturing industry. With precise pressure control of 0.6 Kgf...