Lab Drying Equipment

Brand Name:Sinuo

Model Number:SN889-136L

Place of Origin:China

IEC 60898-1 Heating Cabinet for Circuit Breaker Heat Resistance Test​ Standards & Clauses: It is required by IEC 60898-1:2015 clause 9.14 and 9.16, IEC 61009-1, etc. This equipment has the characteristics of rapid heating, precise temperature control, ...

Brand Name:Sinuo

Model Number:SN882

Place of Origin:China

UV Weathering Test Chamber Ultraviolet Light Accelerated Aging Environmental Test Chamber Standards & Clauses: ASTMG53-77, GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS, SAE and etc. Samples and Restrictions: Coating, ink, paint, resin, ...

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment System introduction: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it ...

Brand Name:Sinuo

Model Number:SN881-225L

Place of Origin:China

IEC 60068 225L Programmable Temperature and Humidity Climatic Chamber Equipment Overview: This temperature and humidity chamber is required by various of standards, such as IEC60335-1 clause 15, IEC60598-1 clause 4.9, etc. This test chamber is used for ...

Brand Name:Sinuo

Model Number:SN1104

Place of Origin:China

IEC60950 1.2/50 μS Impulse Voltages Generator 2 Internal Resistances Product information: This impulse voltage test generator is required by IEC60335-1:2004, IEC60950-1:2005,IEC60065:2005,GB4706.1and etc. The equipment is used to verify transient ...

Brand Name:Sinuo

Model Number:SN1104

Place of Origin:China

What is the impulse voltage generator? How is impulse voltage generated? Brief Introduction: The impulse voltage generator comforms to the standards as follow. IEC60335-1:2016 clause 14. IEC60950-1:2013 clause1.5.7.2, 1.5.7.3,2.10.3.9,6.2.2.1,7.4.2,7.4.3,...

Brand Name:Sinuo

Model Number:SN1101

Place of Origin:China

IEC 60065 Clause 5.1 Label Marking Abrasion Test Equipment Product information: This label marking abrasion test equipment is designed and manufactured according to the standard requirements of IEC 60065:2014 clause 5.1, IEC 60335-1 clause 7.14, IEC 60950:...

Brand Name:Sinuo

Model Number:SN5514

Place of Origin:China

IEC 60335-1: 2013 cClause 22.12 Figure 13 Small Parts Cylinder Standards & Clauses: This small parts cylinder conforms to IEC60335-1: 2013 clause 22.12 figure 13, ISO 8124-1 clause 5.2 and fig. 15, etc. It is used to check whether there is possibility tha...

Brand Name:Sinuo

Model Number:SNQC1008

Place of Origin:China

Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1 Product Introduction For Accessories Mechanical Strength Impact Test Apparatus: The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 and ...

Brand Name:Sinuo

Model Number:SN-SY2000W

Place of Origin:China

IEC 60335-1 Clause 22.5 Residual Voltage Tester Testing Range 5~150V Test impedance ≥1000 MΩ Product information: The Residual Voltage Tester is in accordance with the requirements of IEC 60335-1 Clause 22.5 (GB4706.1 Clause 22.5),IEC 60065 Clause 9.1.6 (...

Brand Name:Sinuo

Model Number:SN2112

Place of Origin:China

IEC 60884-1 Figure 12 Screwless Terminals Deflection and Voltage Drop Test Device Standard: IEC60884-1 clause 12.3.12, Figure 12. Application: It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains ...

Brand Name:Sinuo

Model Number:SN991

Place of Origin:China

IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598...

Brand Name:Daruifuno

Model Number:DUC2-SS-S

Place of Origin:China

OTA Online Digital Suspended Solids Analyzer Infrared Sensor For Measurement Of TU Brief Introduction The DUC2-SS-S suspended solids analyzer uses an optical method for determining the turbidity suspended solids, a light beam is directed into the sample...

Brand Name:Daruifuno

Model Number:APX2-C3

Place of Origin:China

Analog PH/ ORP Controller With Historical data records and RS485 For Sewage Or Drinking Water pH controller APX2-C3 with historical record functionality and an RS485 communication interface offers the following features and advantages: Historical Record ...

Brand Name:Daruifuno

Model Number:APX2-G4

Place of Origin:China

5 Points Multi-Slope Calibration And Differential Signal Solution Ground Analog PH/ ORP Controller For Power Plant The pH controller APX2-G4 is highly suitable for a wide range of application environments that require high-precision pH measurement, ...

Brand Name:Daruifuno

Model Number:OZ1.2

Place of Origin:China

Two-Wire 4-20mA Two-Electrode Ozone Sensor For Drinking Water, Direct Drinking Water, Service Process Water Two-electrode system ozone sensor OZ1.2, used in drinking water, direct drinking water, service and process water, measuring water without ...

Brand Name:YUNYI

Place of Origin:China

Model Number:MH-A

MH-A ultrasonic level measuring instrument, taking the advantages of various many level measuring instruments, is a universal one characterized by total digitalized and humanized design. It has perfect level monitoring, data transmission and man-machine ...

Brand Name:Yunyi

Model Number:XY2006B

Place of Origin:China

Portable Gauge Calibration Equipment Pressure Calibrator Pressure Calibration Instruments Description Portable Gauge Calibration Equipment Pressure Calibrator Pressure Calibration Instruments Portable Gauge Calibration Equipment Pressure Calibrator ...

Brand Name:Yunyi

Model Number:PB Balance

Place of Origin:China

Water Pressure Balance Dead Weight Tester Test Equipment, Piston 5 ~ 600 bar Description A pressure balance is equivalent to a liquid balance. On one side, it is the pressure generated by the weight. While the pressure in the liquid pipe is displayed, when...

Brand Name:Yunyi

Model Number:DMF-1-CR Tuning Fork Density Meter

Place of Origin:China

Description Tuning Fork Density Meter Tuning fork density meter is the introduction of foreign advanced frequency tracking technology and the production of high-precision, high applicability vibration principle density meter, product design using plug-in ...