| Sign In | Join Free | My benadorassociates.com |
|
| Sign In | Join Free | My benadorassociates.com |
|
| Categories | Fiber Optic Transceiver |
|---|---|
| Brand Name: | OEM |
| Model Number: | OEM |
| Certification: | ISO9001 |
| Place of Origin: | china |
| MOQ: | 1Pcs |
| Price: | Negotiable |
| Payment Terms: | T/T, L/C, Western Union, MoneyGram,Paypal |
| Supply Ability: | 5000Unit/Month |
| Delivery Time: | 3-6 work days |
| Packaging Details: | pvc box+outer carton |
| Product name: | 40G QSFP Transceiver |
| Wavelength: | 850nm |
| Distance: | 100m |
| Data rate: | 40Gb/s |
| Interface: | Single MPO connector |
| Power supply: | Single +3.3V |
| Warranty: | 3 Years |
| Application: | Ethernet,Fiber Channel,Switch to Switch interface |
| Company Info. |
| Beijing Silk Road Enterprise Management Services Co.,LTD. |
| Verified Supplier |
| View Contact Details |
| Product List |
40G QSFP PSM LR4 is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. Itprovides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.
An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.
Features
Parameter
| Package (Form Factor) | QSFP+ |
| Data Rate (typical) | 10.3 Gbps/CH |
| Centre Wavelength | 850nm |
| Distance | 100m on OM3 MMF |
| Diagnostics | Digital Monitor |
| Transmitter | 4CH VCSEL Array Laser |
| Receiver | 4CH PIN photo detector Array |
| TX Output Power (dBm) | -7.5~+2.5 |
| RX Sensitivity (dBm) | -9.5 |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | MTP/MPO 8F MMF Without PI |
| Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
| Transmitter | |||||||
| Center Wavelength | λC | 1270 | 1310 | 1350 | nm | 1 | |
| RMS Spectral Width | λrms | 3.5 | nm | 1 | |||
| Average Launch Power, each lane | PAVG | -5.5 | -0.5 | +2.3 | dBm | ||
| Optical Modulation Amplitude (OMA) | POMA | -4.5 | -0.5 | +3.5 | dBm | 1 | |
| Difference in Launch Power between any two lanes | Ptx,diff | 5.0 | dB | ||||
| Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane | OMA-TDP | -9.7 | dBm | 1 | |||
| Rise/Fall Time | Tr/Tf | 50 | ps | ||||
| Extinction Ratio | ER | 3.5 | dB | ||||
| Relative Intensity Noise | Rin | -128 | dB/Hz | ||||
| Optical Return Loss Tolerance | TOL | 12 | dB | ||||
| Transmitter Reflectance | RT | -12 | dB | ||||
| Transmitter Eye Mask Margin | EMM | 10 | % | 2 | |||
| Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | ||||||
| Average Launch Power OFF Transmitter, each Lane | Poff | -30 | dBm | ||||
| Receiver | |||||||
| Center Wavelength | λC | 1270 | 1310 | 1350 | nm | ||
| Damage Threshold | THd | +3 | dBm | ||||
| Overload, each lane | OVL | +1 | dBm | ||||
| Receiver Sensitivity in OMA, each Lane | SEN | -12.5 | dBm | ||||
| Difference in Receive Power between any two Lanes (OMA) | Prx,diff | 5.0 | dB | ||||
| Signal Loss Assert Threshold | LOSA | -30 | dBm | ||||
| Signal Loss Deassert Threshold | LOSD | -15 | dBm | ||||
| LOS Hysteresis | LOSH | 0.5 | 6 | dB | |||
| Optical Return Loss | ORL | -12 | dBm | ||||
| Receive Electrical 3 dB upper CutoffFrequency, each Lane | Fc | 12 | GHz | ||||
Notes:
1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.
2. The eye diagram is tested with 1000 waveform.
Order Information
| Part Number | Product Description |
| QSFP-SR4 | 850nm, 40G, 150m, 0ºC ~ +70ºC |
| QSFP-CSR4 | 850nm, 40G, 400m, 0ºC ~ +70ºC |
| QSFP-LR4 | 1310nm, 40G, 10km, 0ºC ~ +70ºC |
| 10GQSFP-CA-1M | 10G, copper with 1M optical cable |
Product Pictures
FAQ
Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for
order quantity more than
Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive. Airline and sea shipping are also optional.
|
40G QSFP 40G LR4 1310NM 10KM LC Sfp Fiber Optic Transceiver
10KM DDM QSFP28 100G LR4 Wdm Sfp Module , Sfp Fiber Transceiver
ISO9001 Lc Interface 10G SFP+ AOC Active Optical Cable
1.25G CWDM 40KM 1270nm Fiber Optic Transceiver , Sfp Optical Module
10G CWDM 1550nm 80km SFP+ Fiber Optic Transceiver
1310nm 1550nm Sc 20Km 155M Bidirectional Fiber Optic Transceiver
1.25G Lc Connector 20Km Single Bidirectional Optical Transceiver
ISO9001 1.25G Bidi SC ST SFP 1x9 Fiber Optic Transceiver
1.25G 1310NM 10Km Class C+ C++ Gpon Olt Sfp Module Transceiver
