Pipe Route Tracing Underground Pipe Locating System For Cable Locator

This device is a high performance underground metallic pipe locating system.It consists a transmitter and a receiver, can be used to do route tracing, pipe exploration and depth measurement of the underground cables and metallic pipes.It can also be used to identify target cable from a bunch of cables,locate the pipe insulation damage and part type cable fault.

FUNCTIONS

l Compass display: to display pipe position directly.

l Real-time depth measure and current measure.

l History curve display: to display the signal variation directly.

l Cable Identification: Clamp (optional) identification and sensor identification.

l Grounding fault location: Use A frame (optional) to pinpoint pipe insulation damaged points against ground.

l Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.

l Multiple locating frequency: active detection and passive detection.

l Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.

l Big capacity Li-on batteries series,support auto power off when low battery or long time no operation

l Solid case and light weight easy to carry

SPECIFICATION

Transmitter:

l Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output.

l Output Frequency: 640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.

l Output power: max. 10W, 10 levels adjustable, auto impedance matching.

l Direct connection voltage: max. 150Vpp.

l Overload and short circuit protection.

l HMI: 128X64 LCD.

l Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah.

Receiver:

l Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).

l Receiving frequency:

- Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz

- Power frequency: 50Hz/60Hz,250Hz/300Hz

- Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz

l Pipe detection mode: wide peak method,narrow peak method,valley method

l Cable identification mode: Receiving Clamp (optional) intelligent identification / sensor (optional) identification

l HMI: 320X240 LCD

l Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah

Other:

l Volume: transmitter 270x220x85mm,receiver 700x270x120mm

l Weight: transmitter 2.2kgs, receiver 2.2kgs

l Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A

l Temperature: -10-40℃,humidity 5-90%,elevation <4500m

About GDZX
 

Wuhan GDZX Power Equipment Co.,Ltd. is located in Wuhan, China, covering an area of 50 acres, with 6,000 m2 of factory space and 12,000 m2 of office buildings. We specialize in power testing equipment, engineering services, equipment commissioning, operations and maintenance testing, calibration, energy-saving and environmental protection equipment, and power sales. Our integrated solutions provide complete high-voltage testing and electrical inspection services to various power users.

Guodian Zhongxing integrates R&D, production, sales and service, and provides complete solutions for high voltage testing and electrical testing services for all types of power users. It is a well-known brand of electrical testing equipment in China.

The six major categories of products independently developed and produced by the company are mainly used in the handover test, preventive test, condition maintenance and intelligent substation detection of various voltage levels of power equipment in all links of the power system from power generation, transmission and distribution to distribution, factory inspection and annual inspection of primary equipment. Specifically divided into: high voltage/ultra-high voltage/ultra-high voltage AC and DC test equipment series, mobile power test intelligent integrated system, transmission and transformation test instrument, power metering/standard series, SF6 gas/oil test series, battery test series. All products have passed the inspection or type test of the "National Power Industry Electrical Equipment Quality Inspection and Testing Center"; and obtained the calibration certificate of the "National High Voltage Metering Station".