S-400-2R Yokohama Air Spring S400-2R AIRSUSTECH F-400-2 Style Rubber Punch Air Suspension

Yokohama Air Spring S-400-2R S400-2R AIRSUSTECH F-400-2 Style Rubber Punch Air Suspension

Information

OE NO.: Yokohama Shock Absorbers S-400-2
Spring Material: Rubber
Spring Type: Air Spring
Size: 400-3
Warranty:12 months
Place of Origin: China
Yokohama air spring
For Yokohama from Japan
Yokohama air suspension

OEM Cross reference

AIRSUSTECH Part No.: F-400-2

YOKOHAMA S-400-2R

YOKOHAMA S 400 2R

YOKOHAMA S-400-2

YOKOHAMA S 400 2

YOKOHAMA S400-2

YOKOHAMA S 400 2

YOKOHAMA S400-2R

Specifications and Detailed Technical Parameters: F-400-2

Design Height: 102mm

Max. Height: 167mm

Min Height: 57mm

Maximum stroke(mm): ±45

Max diameter(mm) :460

Standard Height,Internal Pressure 0.49 M pa When The General Value

Effective Area (Cm2): 1260

Volume(L): 11.9

Load (KN):61.6

Dynamic Spring Parameters (N/mm): 1344

Natural Frequency (Hz): 2.3

Max inner preesure limited (Mpa): 0.69

Burst inner pressure (Mpa): 3.9-4.9

The self-sealing type has excellent durability due to less rubber deformation during expansion and contraction.

Operation Precautions

1. For the stroke of the air spring, please refer to the range of the common maximum stroke listed
2. If the air spring is used at a height higher than the maximum height, it may cause the upper and lower plates and the air spring to fall off, and the internal air will quickly leak out, causing danger. Therefore, appropriate control measures must be taken during use.
3. For the commonly used maximum internal pressure of air springs, please refer to the listed internal pressure range. In order to ensure durability, it is recommended to control the internal pressure within 0.5MPA, but in the self-sealing type, if the internal pressure is too low to ensure sealing, the internal pressure should be kept above 0.1MPA.

Who are we

We are based in Guangzhou China, start from 2008,sell to Eastern Europe,Northern Europe,Western Europe,Domestic Market,North America,South America,Africa,Eastern Asia,Southeast Asia,Mid East,Southern Europe,Oceania,Central America and other countries. There are total about thousands of products model in our factory.

The related picture of F-400-2

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.