PE-6800 PE-6300 PE-6000 Haematology Reagents For Procan 3 Part Diff Analyzers

Hematology Analyzer Reagents Procan Hematology Reagent For Procan 3 Part Diff Analyzers

Intended Use
To be used for blood cell counting, sizing, and WBC differentiation, hemoglobin determination on Procan 3 part diff hematology analyzers. This product is for In Vitro Diagnostic Use only.

APPLICABLE INSTUMENT
For use with Procan PE-6800, PE-6300, PE-6000 hematology analyzers

Specification

KIT COMPOSITION

Procedures

• Remove all the reagent aspiration tubes from the currently used reagent boxes or bottles.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
• Put the tubes into the LABNOVATION reagent boxes or bottles.
• Run at least 50 backgrounds. Check for the acceptable values. At first high background counts can be seen, that should lower to normal after a few runs.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary.

Advantage

• One source for all brands of analyzer
• Reagents for both 3-parts and 5-parts
• Ready-to-use final products and bulk OEM reagents
• ISQ13485:2003 and ISO9001:2008 certified
• CE marked, FDA cleared
• Well-established brand used by thousands of lab in 95 countries
• High quality, high performance and high fidelity of correlations with original brand

Storage

• Store the product at 5-35℃ in a dust free place with good ventilation. Temperature outside the range may damage the product.
• The open vial life of the product is 30 or 60 days (according to the table above). Unused reagents should be discarded after period of validity. Do not mix residual with a new carton.

L-L01	LYSE PE	24 months	30 days
L-D01	Diluent PE	24 months	60 days
L-C01	Detergent PE	24 months	60 days
L-C04
L-C05
L-C02	Cleaner PE	18 months	30 days
L-C03	Clair PE	12 months	30 days

PRECAUTIONS

• Re-calibration is recommended when changing the origin of the reagents.
• It is not recommended using different brands of solutions together on one unit of analyzer.
• Do not ingest. Avoid contact with skin and eyes.
• Skin contact: Flush with plenty of water.
• Eyes contact: Flush with plenty of water. Obtain immediate medical attention.
• This kit is for professionals and in vitro diagnostic use only.

FAQ

• About MOQ?

We have the limit order which is 10000, we would like to cooperate with you, don't worry about MOQ, just send us of your what items you want order.

• What is your lead time?

Stock 3-7 days in general. Or please contact us by email for specific lead time base on your order quantities.

• Accept OEM or ODM order?

Yes, we accept both OEM and ODM for customers.

• What are your terms of delivery?

We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.

• Manufacturer or Trade Company?

We're Manufacturer.

Labnovation Technologies, Inc. is an original manufacturer established in Shenzhen, China since 2001. We are dedicated in developing and manufacturing IVD instruments and reagents including HbA1c analyzer and reagents, rapid test reader & reagents, hematology reagents, clinical chemistry reagents, electrolyte reagents, wash solution and urine test reagents.
 

Labnovation products are developed in house, tested extensively in clinics and passed strict quality controls. All of our products are CE marked and approved by SFDA. In the past 15 years, our products have been exported to 110 different countries and used in 8000 hospitals worldwide. We provide both ready-to-use final products and bulk OEM reagents, including ready-to-use reagents, concentrated, and powder.

With an investment of 10% of our annual sales into R&D, we release new products every years. We win more and more domestic and international cooperation by company reputation and products quality while we actively take part in fairs like MEDICA,AACC, ARBA HEALTH and so on through which we are well-known by the companies in this field.