DN1800 Limited Tie Rod Epdm Elastomer Flexible Fully Seal Rubber Expansion Bellows Large Diameter

DN1800 Limited Tie Rod Epdm Elastomer Large Flexible Rubber Fully Seal Expansion Joint Rubber Expansion Bellows

End-face fully sealed rubber joint
The characteristics of this product are: the flange touches the end face of the sphere, which not only improves the high-pressure resistance of the product, but also plays a good role in preventing it from pulling off.

Installation Notes

1. Rubber joints should be installed according to the natural length of the product, and installation beyond the displacement limit is strictly prohibited.
2. The pipeline must be supported by a fixed bracket or bracket, and both ends of the rubber joint must have a fixed bracket. The closer the bracket and the rubber joint are, the better.
3. The force of the pipe fixing bracket must be greater than the axial force, and the joint must not bear the weight and axial force of the pipe itself.
4. Please install within the allowable value range of the product. Exceeding the range of displacement and deflection will cause the rubber joint to leak or pull off.
5. The bolts should be tightened gradually at the corners. Excessive tightening will damage the sealing surface.

Product drawing

Factory photos

Factory workshop photos

FAQ

Q: Can you provide drawings and technical data?

A: Yes, our professional technical department will design and provide drawings and technical data.

Q: What's the working temperature?

A: The working temperature is -20℃~120℃.

Q: What’s the material of flange?

A: The material of flange can be carbon steel, stainless steel and ductile iron.

Q: Can you provide only rubber?

A: Yes, we can provide only rubber.

The company adheres to the business philosophy of "customer satisfaction is our first duty, all employees are responsible for creating quality, continuous improvement sets new heights, honest service builds reputation", and wholeheartedly provides high-quality products and professional services to new and old customers.

The factory mainly produces rubber expansion joints, duckbill check valves, dismantling joint, bellow expansion joints, compensators, repair clamp, 02S404 national standard waterproof casings, gate valves ,butterfly valves etc; and all products have passed ISO 9001:2015 quality management system certification; adopting national and industry standards, advanced manufacturing technology, strong R&D and manufacturing capabilities, they are widely used in water supply, drainage, electricity, chemical industry, gas, metallurgy, urban construction and environmental protection and other pipeline industries.