Polyurethane Structural Two Component Adhesive High Strength BZ-6800-200-4K

BZ-6800-200-4-K: High-Strength Polyurethane Structural Adhesive for Extreme Environments

BZ-6800-200-4-KAB is a two-component, solvent-free polyurethane structural adhesive engineered for high-stress applications in new energy and electronic systems. With exceptional mechanical strength, long-term durability, and UL94 V0 flame retardancy, it provides reliable bonding for battery modules, structural frames, and electronic components operating in extreme temperature and humidity conditions. This adhesive complies with REACH and RoHS 2.0 standards, ensuring suitability for international markets and reducing environmental impact.

Key Product Features

1. Ultra-High Shear Strength: ≥8 MPa shear strength (aluminum/aluminum) at 25°C, maintaining ≥7.18 MPa after 1000 hours at 85°C/85% RH and ≥9.176 MPa after thermal cycling (-40°C to 85°C), ensuring long-term durability in harsh environments.
2. Rapid Curing: Achieves full curing in 6–7 hours at 25°C, enabling efficient production cycles while maintaining high bond strength and dimensional stability.
3. UL94 V0 Flame Retardancy: Provides critical fire safety for high-power electronic modules and energy storage systems, meeting strict industry standards for thermal management and fire protection.
4. Wide Substrate Compatibility: Bonds effectively to metals, fiber-reinforced composites, ceramics, and pretreated plastics, eliminating the need for surface treatments in most cases.
5. Excellent Electrical Insulation: >1.5×10¹⁴ Ω·cm volume resistivity ensures reliable electrical insulation, preventing short circuits and ensuring safe operation in electronic systems.

Technical Parameters

Product Applications

1. New Energy Battery Modules: Bonds battery cells to structural frames and cooling systems in electric vehicles and energy storage systems, ensuring mechanical stability and efficient heat dissipation in extreme temperature conditions.
2. Aerospace & Defense Components: Assembles lightweight composite panels and structural components in aircraft and defense systems, providing high strength and resistance to thermal cycling and humidity.
3. Marine & Offshore Structures: Bonds composite panels and metal components in shipbuilding and offshore platforms, ensuring durability and resistance to saltwater corrosion and extreme weather conditions.
4. Industrial Power Electronics: Mounts power modules and heat sinks in motor drives, inverters, and rectifiers, ensuring reliable performance in heavy machinery and automation equipment operating in high-temperature environments.
5. Outdoor Telecommunications Equipment: Seals and bonds base station components and antenna systems, providing structural integrity and resistance to environmental factors in remote or outdoor locations.

Critical Handling & Curing Precautions

1. Surface Preparation: Ensure surfaces are clean, dry, and free from oil, grease, or contaminants before application. For optimal bonding, lightly abrade metal surfaces to increase surface area.
2. Mixing & Application: Use a 1:1 weight ratio of A and B components, mixing thoroughly with a static mixer or mechanical stirrer. Apply immediately using a caulking gun or dispensing equipment, ensuring complete coverage of bonding surfaces.
3. Curing Conditions: Allow 6–7 hours for full curing at 25°C, or accelerate curing at 80°C for 2–3 hours. Maintain workshop humidity below 70% during application to prevent moisture-induced defects.
4. Safety Precautions: Wear nitrile gloves and safety goggles during handling. If contact with eyes occurs, flush with plenty of water for at least 15 minutes and seek medical attention. Wash hands thoroughly with soap after use.

Directions for Use

1. Pre-potting Preparation: Calibrate scales, prepare potting tools, cleaning tools, check machine settings, check vacuum pump force, etc.
2. Product Pre-treatment: Place product on a level surface or fixture. Remove dust, clean, degrease, and dry if necessary.
3. Accurate Proportioning: Manual operation requires precise mixing according to the specified ratio and recording. Machine potting requires calibrated ratios and first-article confirmation is recommended.
4. Mixing & Stirring: Manual operation requires thorough stirring or using electric stirrers to ensure homogeneous mixing. Machine potting requires sufficient stirring speed, adjust as needed.
5. Uniform Potting: Manual operation should be done in small, multiple batches to ensure uniformity. Machine potting should follow the programmed path for quantitative dispensing.
6. Inspection or Secondary Potting: After potting, visually inspect as needed. Perform touch-up, bubble removal, or secondary potting if required.
7. Curing: Allow the potted and inspected products to cure at room temperature or with heat assistance (recommended 60°C if needed), according to product and process requirements.
8. Final Product Confirmation: Perform visual inspection and performance testing as required by the customer.

Packing & Shipping & Storage

1. Packaging: 400ml cartridges, 5-gallon drums, and 55-gallon drums for both Component A (light yellow paste) and Component B (gray-black paste).
2. Shelf Life: 6 months from production date when stored in a cool, dry place away from direct sunlight.
3. Opened Container: Seal tightly after use and store in a dry environment. Use within 3 days for optimal performance; discard if signs of contamination or curing are observed