high temperature molybdenum bar rod

Brand Name:HMD

Model Number:NONE

Place of Origin:CHN

...: >=10.1g/cm3 Dia: 1.0-120mm Surface: Polished, ground, cleaned, black. Standard: ASTM B386 TZM and Mola rod chemical Composition is: TZM rod: Mo + 0.40-0.55%Ti + 0.06-0.12%Zr + 0.01-0.04% C

Place of Origin:Baoji

Brand Name:HUAHENG TITANIUM

Model Number:HUAHENG002

...cm3) Pure molybdenum rod Mo1 ≥9.8 TZM rod TZM ≥9.6 High temperature molybdenum rod GMo1 ≥9.6 Size of molybdenum bar/rod φ(20-100) ×(250-800) Tolerances(mm) diameter: ± 3 length: ± 10 Application of molybdenum bar/rod 1.used in the manufacture of

Brand Name:TISCO

Model Number:Inconel 600 601 625 718 X750

Place of Origin:CHINA

...Bar/Rod For Corrosion Resistant Structural Materials Inconel 600 alloy is a nickel-chromium-iron-based solid solution strengthened alloy with good high temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding properties, and has satisfactory thermal strength and high...

Brand Name:ZhenAn

Model Number:9.95% Pure Molybdenum Bar Rod

Place of Origin:China

...aerospace, molybdenum is used to manufacture missile combustion chambers, engine nozzles, and other critical components, thanks to its high melting point, strength, and low linear expansion coefficient. In the medical field, molybdenum bars are used in the

Model Number:Molybdenum Rod

... efficiency, high heat generation, and short service life, these light bulbs have been gradually replaced by fluorescent and lately by LED lights. Furnace parts and High-temperature alloys. Due to high melting points and high strength, molybdenum and its

Brand Name:Sifon

Model Number:Ø8mm*L

Place of Origin:China

..., screws, rabbles in rare earth smelting industry, heating electrodes in glass industry and support of lamp in the lighting industry, etc. 1. The density of our molybdenum rods is from 9.8g/cm3 to 10.1g/cm3; The smaller diameter,the higher density. 2.

Brand Name:FGD

Model Number:FGD M-001

Place of Origin:China

High Quality High Purity 99.95% Pure Moly Molybdenum Bar Rod Molybdenum rod Our products are high-purity powder, featuring less impurity content in bar blanks, high sintering density and large deformation of the forged finished products. We lay emphasis on the control over forging technologies in the machining process, which is supplemented by a hot isostatic pressing (HIP) process as necessary, to ensure the characteristics of high...

Brand Name:PRM

Place of Origin:China

Model Number:custom

... rod. It has many good properties. High-temperature oxidation resistance. In a high-temperature oxidizing atmosphere, a dense quartz glass protective film will be formed on the surface. The protective film can protect the substrate of the heating rod, and

Categories:Pure Molybdenum product

Country/Region:china

Dear Sir or Madam: We can sell Molybdenum Bars, Rods, Profiles, Plates, Sheets, Strip and Foil with high quality and competitive price!The molybdenum bar in the picture is 15mmx25mmx300mm(Mo:>=99.96%) Wish hear from you soon!

Brand Name:Sanhui

Model Number:Mo1

Place of Origin:Henan, China

High Temperature Molybdenum Connecting Plate With Ground Surface Mo>=99.95% Molybdenum Products Sizes Type Thickness(mm) Width(mm) Length(mm) Sheet >0.3 0-800 0-2000 Mo alloy plate 1-3 0-350 0-700 Bar Dia 110 0-2000 Disk Dia 20-600 6-25 Characteristics of Molybdenum Plate Molybdenum has high melting point, good high-temperature...

Brand Name:UST

Model Number:ASTM 4340

Place of Origin:MAINLAND CHINA

...High Tensile Steel Bar / Rod 12-320mm INTRODUCTION Alloy steels are designated by AISI four-digit numbers. They comprise different kinds of steels having composition exceeding the limitations of B, C, Mn, Mo, Ni, Si, Cr, and Va set for carbon steels. AISI 4340 alloy steel is a heat treatable and low alloy steel containing chromium, nickel and molybdenum. It has high...

Brand Name:Zhenfang

Model Number:ZF0140

Place of Origin:China

...High Purity High Temperature Molybdenum Cup Crucibles for Sapphire Growth Furnace General Information Tungsten Crucibles (English name: Tungsten Crucibles) is one of the metal tungsten products, mainly divided into sintering molding (applied to powder metallurgy technology), stamping molding, spinning type. It is formed by turning the tungsten rod...

Place of Origin:Suzhou, China

Brand Name:AIWEN

Model Number:ASTM A453 Gr.660-A286

...High Temperature Alloy Bar Black or Bright Finish A286 is a precipitation hardening, austenitic stainless steel designed for use at temperatures up to 1300°F (704°C) , where high tensile strength, excellent creep strength and good corrosion resistance are required. LSS™ A286 is available in a wide range of ingot, billet, bar, and coil rod sizes. Bar...

Brand Name:SONGYU

Model Number:Ring

Place of Origin:China

... temperatures, and can work stably in an environment of 1600℃ - 1800℃; the ring structure makes the heat uniform and can efficiently transfer heat; it has good chemical ...

Brand Name:SUPER

Model Number:1700 1800type

Place of Origin:Henan,China

... resistance, oxidation resistance and low aging based on molybdenum disilicide.When used in high temperature oxidation atmosphere, a layer of bright and compact quartz (SiO2) glass film is formed on the surface, which can protect the inner layer of

Brand Name:changsheng

Model Number:csty

Place of Origin:China

Gr5 Gr2 high strengh titanium bar/rod 30mm diameter Product Name Gr5 Gr2 high strengh titanium bar/rod 30mm diameter Material titanium Color Silver Standard ASTM F67 ASTM F136 etc. Grade Gr1 Gr2 Gr4 ...

Brand Name:ENSINGER

Model Number:ULTEM PEI

Place of Origin:China

ENSINGER PEI Anti-radiation/High temperature resistance Plastic Rod/Sheet/Tube Available Customizable Sizes Colors #detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-...

Brand Name:SF

Model Number:LCD-1

Place of Origin:China

TAB High Temperature Step-Press Machine Quartz High Precision High Light Quartz Glass Bar Processing Custom Product description: Quartz layering, using quartz as raw material, light transmittance up to 99%, no bubbles, black spots and other adverse ...