polyurethane thermal conductive structural adhesive

Brand Name:Huitian

Model Number:8658G

Place of Origin:China

...EN.pdf 8658G Two-Component Polyurethane Thermal Conductive Structural Adhesive Two-component polyurethane structural bonding adhesive has high bonding strength to aluminum, good toughness, and certain thermal conductivity. With a volume ratio of 1:1, it ...

Brand Name:BaiZhuang

Model Number:BZ-6800-100

Place of Origin:China

... W/m·K High Thermal Conductivity Polyurethane Structural Adhesive BZ-6800-100 is a two-component, solvent-free polyurethane structural adhesive engineered for high-power electronic systems, offering exceptional thermal conductivity, mechanical strength...

Brand Name:Ziitek

Model Number:TIS580-12

Place of Origin:China

...Thermally Conductive Silicone Adhesive TIS™580-12 Series is dealcoholized, 1 component, room temperature cure thermally conductive silicone adhesive. It possesses good heat conduction and adhesion towards electronic components. It can be cured to a higher hardness elastomer, leads to firmly attached to substrates resulting lower down thermal...

Brand Name:Ziitek

Model Number:TIE280-25AB

Place of Origin:Vietnam

...Thermal Conductive Epoxy Adhesive TIE™ 280-25AB is a two compound, high thermal conductive, low temperature cured, long pot life, fire resistant epoxy encapsulant compound. It is design for potting of capacitors and electrical devices. Features > Good thermal conductive...

Brand Name:ziitek

Model Number:TIS580-12

Place of Origin:China

... adhesive. It possesses good heat conduction and adhesion towards electronic components. It can be cured to a higher hardness elastomer, leads to firmly attached to substrates resulting lower down thermal impedance. Thus, heat transfer among heat source,

Brand Name:Hanast

Model Number:HN-8820

Place of Origin:china

Product Description: Introducing our innovative Thermally Conductive Potting Compound, a high thermal conductivity potting gel with a thermal conductivity of 2.0±0.1 W/M▪K. This electrically insulating thermal potting material is designed to meet the ...

Brand Name:wenyou

Model Number:9215

Place of Origin:China

... A) epoxy resin, combined with LH-9215, a liquid modified carboxylic anhydride hardener. This thermally conductive epoxy adhesive is designed to protect electrical power components while providing effective insulation. Applications This epoxy resin is suitable...

Brand Name:PF

Model Number:00

Place of Origin:Guangdong,China Mainland

Thermal conductive silicone pad Insulation electric thermally conductive silicone thermal pad LED Thermal Pad LED Thermal Pad LED thermal pad is a high performance thermal conductive gap filling material, mainly used for thermal interface between electronic components and heat sink or product outer covering. FEATURES * Excellent thermal conductivity * Self-adhesive, natural sticky, no extra surface added adhesives...

Brand Name:None

Model Number:DS-6CA

Place of Origin:China

... and is packaged by a dual interface smart card. Excellent adhesion to PVC, ABS, PC, FR-4 and other materials. This product is a large molecular weight structural hot melt tape. The superior cohesion ensures that there is no structural breakage in

Brand Name:Adcol

Model Number:A-gaphite 820

Place of Origin:China

... are desired. Its unique grain-oriented, plate-like structure provides a high thermal conductivity of 240 W/mK in the XY plane and 5 W/mK through the z-axis.. A-gaphite 800 can be supplied in 12” x 18” (305mm x 457mm) or 18” x 24” (...

Brand Name:Joyway

Model Number:JC-7770

Place of Origin:Hebei, China

... especially for manufacture of rigid polyurethane foams. Which have fine and uniform closed cell structure and makes the foam have extreme F thermal conductivity(K-factor). In addition, the product provides excellent liquidity and dimensional stability .

Brand Name:KHJ

Model Number:TS630HV

Place of Origin:Guangdong, China

...ked pressure-sensitive adhesive single-sided coated thermal release tape. It has a high initial adhesion and easily is peeled off by heating under a certain high temperature(145℃). Features And Benefits: 1. Adhesive strength becomes almost “zero” by

Brand Name:DOWSIL

Model Number:1-4173

Place of Origin:USA

... offers high tensile strength and good thermal conductivity (1.8 W/m·K), contains no solvents, requires no mixing, and is suitable for automated or manual dispensing. Product Introduction Formulated with polydimethylsiloxane and aluminum oxide, DOWSIL™

Place of Origin:China

AB epoxy 2 component potting machine two part epoxy machine for thermally conductive adhesive Potting is a method for processing resins based on silicone, polyurethane or epoxy in liquid form to cover electrical components such as PCBs or for filling out ...

Brand Name:BOALV

Model Number:0.3-10

Place of Origin:China; USA

Square heat conductive material double-sided adhesive tape Double sided thermally conductive adhesive tape, fiberglass and non-fiberglass options available, provides exceptional heat transfer and bonding. They apply quickly and easily, and their good ...

Brand Name:AOK

Model Number:TP

Place of Origin:China

Low Hardness Thermal Conductive Silicone Pad For EV Power Battery Attribute Value Test Method Composition Ceramic Filler + Silicone - Color Pink Visual Thickness (mm) 0.5~12.0 ASTM d374 Density (g/cc) 2.3 ASTM D792 Hardness (Shore OO) 20±5 ASTM D2240 ...

Brand Name:Prosper

Model Number:PRO001

Place of Origin:Hunan, China

.... PRO001 could be used in all kinds of electronic products of thermal conductivity and adhesion. PRO001 has excellent electrical insulation property, dampproof, anticorona, the function of cushion, and good high and low temperature resistance performance,

Brand Name:Maxtech

Model Number:SI8230

Place of Origin:China

... Description ●SI8230 is two-component silicone based thermal conductive potting adhesive. It has a good fluidity after mixing, can vulcanize to deep layer in room temperature. The operation time can be adjusted according to the temperature. Used to

Brand Name:BAXIT

Model Number:GLO-CT3

Place of Origin:China

... the length and width of at least twice the diameter of probe can be. 2. Non-destructive testing on samples, samples can be reused. 3. The probe using the double-helix structure design,