power fittings preformed dead end

Brand Name:HLLP

Model Number:DN2415

Place of Origin:CHENGDU CHINA

Preformed dead end for strand Preformed dead end for strand is made of the same basic material as the strand to which it is applied.Common materials are galvanized steel wire and aluminum-clad steel wire .It is intended to ...

Brand Name:YINGDA

Model Number:preformed strain sets

Place of Origin:China

Preformed Dead End Grip 1/7" 3/16" 5/16" 3/8" Dead End Power Fitting for Adss Cable THE PREFORMED TENSION SET is widely used for the installation of bare conductors or overhead insulated conductors for transmission and distribution lines, the reliability...

Brand Name:HC , OEM

Model Number:ANJ1160 , ANJ1280 , ANJ1410

Place of Origin:CHINA

...like the limited, medium and high tension one found later in this section, the lite tension dead end is reduced to a sigle layer component that offers an economical solution for every light loads.The products effectively transfer the low anxial load on the

Brand Name:Geto Telecom

Model Number:PDE

Place of Origin:China

Preformed Dead End Preformed Armor Rod Description Preformed Dead End is a single layer component that offers an economical solution for very light loads. The product effectively transfers the low axial load on the cable at the end of the Dead-end legs to low uniform radial compression near the Dead-end...

Brand Name:Zion communication OR OEM

Model Number:Dead-end for Medium /Long Span ADSS

Place of Origin:CHINA

Preformed Dead-end for OPGW Dead-end for OPGW is mainly used for the corner towers, the middle tower and Terminal Tower successive connections. Screw Clamp materials, primarily for aluminum clad steel wire, with a very strong resistance to tensile strength...

Brand Name:ZXOFC

Model Number:Tension Clamp

Place of Origin:ShenZhen,China

...,sand blast,Ending treatment OEM service Yes Standard ISO9001 MOQ 100PCS Near Port ShenZhen Or GuangZhou port Application Tension ...

Brand Name:LKY

Model Number:Dead End Tee Guy Attachment

Place of Origin:CHINA

H.D.G. Dead End Tee Guy Attachment Available with either flat mounting base (DET series) or curved mounting base (DETR series) Used for high strength, pole connection interface to clevises, thimble clevises, insulators, shackles and other deadend ...

Brand Name:YokeLink

Model Number:F06

Place of Origin:Zhejiang, China

... preformed dead-ends Thimble clevis with clevis pin Product Details: Feature: Yokelink Thimble Cleivs are used for attaching guy to pole eye plate. ...

Model Number:Preformed 9.5-10.5

Place of Origin:Hangzhou China

Brand Name:Fiberspace

#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:16px;color:#616264;background-color:#eaeaea;font-style:normal;font-weight:bold;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#...

Brand Name:NTS

Model Number:NTS050

Place of Origin:CHINA

Preformed dead end guy grip Specifications 1.Preformed dead end clamps 2.Professional manufacture 3.factory direct price 4.ISO9001:2015 ​ China Factory direct sales Galvanized preformed dead end guy grip GUY-GRIP Dead-ends installed at the top, the breaker and the anchor, provide today’s most effective method for securing guy strand. This unique, one-piece dead-end...

Brand Name:JUNPU

Place of Origin:CHINA

...free from bolts or high-stress holding devices. The preformed dead end clamps are the first to offer the cabled loop, a feature that provides more durability, easier tensioning, and adaptability to multiple guying. Preformed dead ends are made of the same

Place of Origin:China,Zhejiang

Brand Name:DOWELL

Model Number:DW-GDE

Customizable Preformed Guy Grip Dead End For ADSS Cable Preformed dead end grip for ADSS cable is also known as distribution grip dead end, guy wire dead end or preformed dead end grip. The preformed guy grip is a product for the connection to grip the ...

Brand Name:SUNET or OEM

Model Number:ADSS cable

Place of Origin:Qingdao China

...Dead End Tension Clamp Suspension Clamp Description: The strain Clamp conductor set for ADSS cable is used to connect cable and pole or tower for ADSS cable line, and clamp can protect cable and help cable to reduce vibration.With preformed rods' special design,it can keep tension clamp not produce the Preformed Dead-end...

Brand Name:HIVOLT

Model Number:IE-25

Place of Origin:CHINA

... end fittings Description: HIVOLT silicone rubber dead end insulators choose high quality materials for parts : 1 metal fittings the metal fittings use high density forged steel ,every pieces tested qualified after magnetic powder inspection . The fittings...

Brand Name:UNIFIBER or OEM

Model Number:ANZ---001

Place of Origin:CHINA

... cross section dimensions. Preformed Clamp for wires and heart - shaped ring support, resistance of the wire connected to the tower.The clamp and rotating the outer layer of the wire to the same ...

Brand Name:LJ

Model Number:PAMJ-06

Place of Origin:Luohe China

...Dead End Clamps Set With A Bracket Supporting And Anchoring Clamps Aerial Cable Fitting Aerial Cable Fitting The Dead end clamp is designed for the installation and single anchoring of Aerial Bundled Conductors with insulated neutral messenger on poles or walls in rural and urban aerial distribution network. It comprises a bracket supporting one or two anchoring clamps. The Dead end...

Brand Name:ANSHI

Model Number:AS-FTTH-ACC-YJS-1

Place of Origin:China

Tension Clamp preformed skein Dead End span grip Aluminum Pipe Clamp adss fiber guy grip tension clamp Feature: Basic product information ...

Brand Name:HENVCON

Model Number:OXY

Place of Origin:China

... tower/pole.A complete set of OPGW Helical Tension Set includes Aluminum Alloy or Aluminum or Aluminum-Clad steel Dead-end,Structural Reinforcing Rods,Supporting fittings and Grounding wire Clamps etc.

Brand Name:Ksipower

Model Number:XGH Aluminium Alloy Suspension Clamp

Place of Origin:China

XGH Aluminium Alloy Suspension Clamp / Dead End Clamp for Overhead Line Power Accessories Application Suspension clamps are used for the hang conductor or ground wire through insulators or link fitting to tower arms or substation structures. The clamps...

Place of Origin:qingdao of china

Brand Name:MEGATRO

...dead end tower for power transmission Dead-end tower, also named terminal tower, anchor tower or anchor pylon, uses horizontal strain insulators and occur at the endpoints of conductors. Such endpoints are necessary when interfacing with other modes of power transmission and, due to the inflexibility of the conductors, when significantly altering the direction of the tower line. Dead-end...