wdm protection system fiber optical attenuator

Brand Name:GAPHO

Model Number:Fiber Optical Attenuator

Place of Origin:China

...Fiber Optical Attenuator VOA 980/850 nm copper bare fiber for WDM/Optical Switch Protection SystemMechanical Manual Adjustable Attenuator.docx Feature: Low insertion loss High precision/high resolution High stability and reliability Wide wavelength range Application WDM/Optical Switch Protection System Circulator/Isolator Protection System Optical Amplification Network Fiber Optic Sensor/Receiver Protection...

Brand Name:HILINK

Model Number:HL-Attenuator

Place of Origin:China

Attenuator Low Back Reflection WDM Fiber Optic Attenuator 5dB LC/UPC Female To Male Hilink fiber optic attenuator LC/UPC, also known as an optical attenuator, is a passive component that is used to reduce the power level of an optical signal by a predetermined factor in fiber optic transmission system. The intensity of the signal is described in decibels (dB) over a specific distance the signal travels. Fiber optic attenuators...

Brand Name:Geehe or OEM

Model Number:Optical Pad Attenuator, Bulkhead Attenuator

Place of Origin:Wuhan, China

Female to Male Fiber Optic Attenuator LC SC FC MU 1-30dB For PON WDM DWDM LAN EX: BAT -LC-2A-02 Product Description Optical pad attenuators are built with metal-ion doped optical slices and are designed to provide consistent attenuation levels as well as ...

Brand Name:Fujioptic

Model Number:ST-ATT-01

Place of Origin:Wuhan, China

... and GR-1221-CORE) Applications: . Power management in optical networks . Wavelength division multiplexing(WDM) system channel balancing . Erbium Doped Fiber Amplifiers (EDFA) . Optical add-drop multiplexers(OADM) . Receiver protection . Test equipment .

Brand Name:Wuhan Geehe

Model Number:GH-AT-SM-007

Place of Origin:China Mainland

... optical power performance & optical instrument calibration correction & fiber signal attenuation to ensure the optical power in a stable and desired level in the link without any changes on its original transmission wave. Depending on the project or need,

Brand Name:GEZHI or OEM

Model Number:MEMS VOA

Place of Origin:China

...WDM System MEMS Variable Optical Attenuator optic fiber variable attenuator VOA Product Description Gezhi Photonics MEMS attenuators (MEMS VOAs) are based on a micro-electro-mechanical system (MEMS) technology. The MEMS attenuators design achieves highly repeatable optical attenuation...

Brand Name:New Light

Place of Origin:China

...fiber optic Attenuator LC APC female male Fiber Optic Attenuator Applications: Fiber optic systems CATV and telecommunication systems Receiver padding for optical receiver protection Optical power equalization Increasing dynamic range for apparatus Specification: Attenuation Value 1dB ~ 30dB Operating Wavelength 1240 ~ 1620nm (Dual 1310/1550nm) Premium Return Loss UPC >55dB APC >65dB Attenuation...

Place of Origin:Shenzhen（China）

Brand Name:DYS/OEM

Model Number:LC

...Fiber Optic Attenuator 10DB Fast For Optical Power Receivers Protection Quick Details: Model Number: LC attenuator Attenuator Value: 10DB Ploish: PC, UPC Color: Blue Connector: LC Core: Duplex Return Loss: >50 Mating Durability: >1000 cycle LC Fiber optic duplex attenuator DYS FIBER OPTIC...

Brand Name:Takfly/OEM

Model Number:FC

Place of Origin:Shenzhen, China

...Fiber Optic Fixed Attenuator 3dB Attenuation Single Mode Red Cap Fiber Optic Attenuator Description: This is an ST type attenuator, it is made of metal, both sides have a red cap to protect the ceramic sleeve from dust, water, and other damage during transportation and storage. It is the same type with FC fixed attenuator which has no ferrule inside of the attenuator. And the attenuation is 3dB, also it is a fixed type. ST attenuator

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-E2K-attenuator-**dB

Place of Origin:Guangdong, China

...ch fully protects the ferrule from dust and scratches. - E2000 is compliant with EN 186270 and IEC 61754-15 standards. - E2000 cables are duplex types, with 9/125 single mode. - E2000 cables are PC, UPC and APC types. - E2000 Fiber Optic Attenuator fit the

Brand Name:KCO, Kocent Optec Limited

Model Number:KCO-E2K-attenuator-**dB

Place of Origin:Guangdong, China

...ch fully protects the ferrule from dust and scratches. - E2000 is compliant with EN 186270 and IEC 61754-15 standards. - E2000 cables are duplex types, with 9/125 single mode. - E2000 cables are PC, UPC and APC types. - E2000 Fiber Optic Attenuator fit the

Brand Name:UNIFIBER-OEM

Model Number:UNFSTA

Place of Origin:CHINA

Plug-in Fixed Optical Attenuator ST/FC female to male 1-25dB optional,Durable metal shell for permanent protection Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul ...

Brand Name:FOCC

Model Number:FOCC-ATT003

Place of Origin:China

... have two types, one is SC UPC and the other is SC APC, multimode only has SC UPC connectors. They fit typical 1310nm and 1550nm single mode fiber applications.

Brand Name:YOUCII

Model Number:U8130

Place of Origin:China

...Optical Attenuator Large Dynamic Attenuation The U8130 multi-channel DFB light source can be used for the measurement and application of WDM CWDM devices, high precision WDM DWDM devices, optical waveguide grating array AWG devices, planar optical waveguide PLC devices, optical amplifier EDFA and other general optical fiber optics, especially for the mass production detection of couplers and planar optical...

Brand Name:KEXINT

Model Number:KXT-FSW

Place of Origin:SHENZHEN

... route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its

Place of Origin:Hubei, China

Brand Name:YXFiber

Model Number:YXF-GE-B35L-3D/YXF-GE-B53L-3D

...fiber optic transceiver 1GE 3km 1310nm/1550nm wdm ddm sm lc cisco SFP fiber Module Features: 1. Industry standard Small Form Pluggable (SFP) package. 2. Digital diagnostic monitor interface compliant with SFF-8472. 3. 1310nm FP/1550nm DFB Laser and PIN receiver. 4. Very low EMI and excellent ESD protection 5. Power consumption less than 1.0W. 6. Hot-pluggable capability. Applications: 1. Fiber optic...

Brand Name:Dawnergy

Model Number:Longitudinal Tube\Plastic Screw Cover

Place of Origin:CHINA

... is use to protect drop cable. Our main products are: Fiber Optic Cables, Fiber Optical Splitters, Fiber Optic Patch Cord, Pigtails,WDM Modules, Fiber Distribution Boxes, Fiber Optic Sockets, Optical Distribution Cabinets/Hubs, Outdoor Telecom Cabinets,

Brand Name:JQ/OEM

Model Number:GYFXTY-12B1

Place of Origin:Guangzhou,China

... protection. Two parallel steel wires ensure tensile strength. PE sheath protects cable from ultraviolet radiation. Light weight and small diameter, easy to installation and operation. Optical Characteristics G.652 G.655 50/125μm 62.5/125μm Attenuation(