zinc wire for flame tests

Brand Name:ZHENAN

Model Number:pure zinc wire

Place of Origin:China

...Zinc Wire for Flame Tests – 0.5mm-1.5mm, Bright Silvery Finish Product descriptions from the Zinc Wire supplier Low-temperature zinc wire with diameters ranging from ​​0.5mm to 1.5mm​​ and a ​​bright silvery finish​​ is specially designed for ​​flame tests...

Brand Name:Mysun

Model Number:UL3122

Place of Origin:China

...wire UL3122 specification: Flexibility: silicone rubber insulation with fiberglass braided Maximum conductor resistance: 24.4 ohm/km Resistant to oil, hot and cold, flexing Rated temperature: -50°C to +200°C Rated voltage: 600 V Insulation potential strength: 2000 VAC/min Passes the FT2 flame test...

Brand Name:kingpo

Model Number:KP-GWT01

Place of Origin:china

...Wire Tester , glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test...

Brand Name:GC

Model Number:GC-ZRS-A

Place of Origin:China

...determining the fire resistance of electrical and electronic products. -The electronic glow wire flame test machine is widely used in industries such as electronics, automotive, and aerospace to ensure compliance with safety standards and regulations. It

Brand Name:PRECISION

Model Number:SBB20

Place of Origin:CHINA

...Wire Burning Test Machine, a crucial vertical flame testing equipment, plays a vital role in evaluating the flammability and fire resistance of single cables and wires. 1. Product Name and Purpose The IEC60332 Single Cable And Wire Burning Test Machine is

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

...Wire Flame Test Apparatus Cables and Wires Flame Resistance Test Product information: This flammability test chamber meets the requirements of UL1581 and UL94 flame test. The effects of flames in the early stages of fire on electrical and electronic products are used to assess the degree of fire hazard through simulation techniques. It is mainly used for 1080 VW-1 (vertical-specimen) flame test...

Brand Name:Tankii

Model Number:Pure Zinc Wire

...Zinc wire Thermal Spraying Wire product details: Thermal spraying with zinc wire was 99.99%, when the atmospheric conditions is not in serious corrosion (such as dry weather), can reduce the the purity to 99.95%.Zinc has good plasticity, can draw wire material, used for wire arc spraying and flame spraying.When in the flame spraying, purity of zinc...

Brand Name:AI

Model Number:VW-H

Place of Origin:China

...specimen) Flame Test. It can be used to test of 1060 products wire and cable FT1 and vertical burning test,1080 VW-1 test, 1061 test, 1090 horizontal test and 1100 horizontal specimen or FT2 test;to assess the flame spreading ability to combustible near by

Brand Name:Sinuo

Model Number:SN7711

Place of Origin:China

...Test Chamber Flame Testing for Wire & Cable Materials Complied Standards & Clauses This flammability test chamber meets the requirements of the UL1581 and UL94 flame tests. Equipment Overview Designed to meet the stringent requirements of UL1581 and UL94, the SN7711 Flammability Test Chamber from Sinuo Testing Equipment is a reliable solution for evaluating flame resistance in wires, cables, and cords. It simulates flame

Brand Name:YUYANG

Model Number:YYW021

Place of Origin:China

Wire Test Equipment Bunched Cable and Wire Vertical Flame Propagation Test Equipment Product Application: Bunched cable vertical flame spread tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable. In accordance with IEC60332—3—10: 2000for vertical flame spread of vertically-mounted bunches wires...

Brand Name:ZL

Model Number:ZL-1028

Place of Origin:China

...Wire Flame Test Chamber VW-1 Flame Tester FT1/FT2 Flame Test Chamber Technical Description: The single wire and cable vertical burning tester is suitable for measuring the vertical burning non-invasive performance of single plastic wire, control wire, cross-linked, elevator, ship, mining cable and so on. Can also be made of high self-extinguishing low-smoke halogen-free flame...

Brand Name:Haida

Model Number:6011-HD

Place of Origin:China

...Flame Testing Instrument Product Description This instrument simulates small flames generated under fault conditions (e.g., leakage currents, component overheating, poor contacts) to assess fire hazards. Needle Flame Testing Instrument is specifically designed for evaluating fire risks in small components where glow-wire or horizontal/vertical flame tests are unsuitable. If a sample ignites during glow-wire testing, the needle flame test

Brand Name:PEGO GROUP

Model Number:VW-1

Place of Origin:China

... and UL2556, it is applied to test the resistance of a wire, cable or cord to the horizontal and vertical propagation of the flame (VTM, VW-1, FT-1 and FT-2 classifaction). The flammability test uses a bunsen burner of a specified size (inside diameter of

Brand Name:HongCe

Model Number:HVW-1

Place of Origin:China

... Cords. Application of Cable Flame Testing Equipment: The UL 1581 is an internationally recognised standard test for evaluating fire safety for electric cables. The UL 1581 test for flammability of cable materials gives a preliminary indication of their

Place of Origin:China

Brand Name:Lonroy

...Wire Vertical Combustion Tester Single Electrical Cable Vertical Flame Test Equipment Product Description Test standard GB18380.11\12\13_2022 "Cable Burning Test under Flame Conditions - Part 1: Vertical Burning Test Method for Single Insulated Cable or Cable Assembly" is equivalent to IEC60332.1-2004. IEC 60332 Single Wire Vertical Combustion Tester Single Electrical Cable Vertical Flame Test...

Brand Name:VOUCH

Model Number:5707

Place of Origin:CHINA

Cable Flame Test of Wire Smoke Density Tester For Horizontal Burning Test Instrument Model:5707 1.)Standard:IEC 61034,BS 6853,GB/T17651.1~2 2.)Container size(mm):3000*3000*3000 3.)Inner container material:SUS304 stainless steel 4.)Inner filler:calcium ...

Brand Name:DAXIAN

Model Number:DX8297

Place of Origin:China

...Wire & Cable Burning Test Device DX8297 Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable is evaluated by igniting the specimen with a vertically placed flame...

Brand Name:SKYLINE

Model Number:SL-BWV01

Place of Origin:CHINA

... Wires Vertical Flame Tester BWV Bunched Wire Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using...

Brand Name:Gaoxin

Model Number:GX-6053

Place of Origin:Guangdong, China

...102 mm diameter circular hole was drilled on a test platform, and a steel wire net was placed on the circular hole, and the battery under test test was placed on a wire screen. Install an octagonal aluminum mesh around the specimen burns down; and time the

Brand Name:HUONA

Model Number:WIRE

Place of Origin:CHINA

... Sale Thermal Spray Wire Highly Anti-Corroision Zinc Coated Wire 0.45mm Pure Zinc Wire Direct Factory Price Product Description Product Description Thermal spray coating wire Thermal Spray Wire is widely used in arc and flange flame spray systems, highly ...