Lab Supplies

Brand Name:Sinuo

Model Number:SN444

Place of Origin:China

Intelligent Water Supply & Control Cabinet IPX3/4 Oscillating Tubes Test Equipment IEC 60529-2013 Product Information For IPX3/4 Oscillating Tube Testing Equipment: IPX3~4 oscillating tubes test system is designed and manufactured according to IEC60529:...

Brand Name:Sinuo

Model Number:SN9928

Place of Origin:China

Thermostat Life Test Bench Device For Lamp Temperature Measure With PLC IEC 60598-1 Applied Standards: The tester is designed and manufactured according to the standard requirements of Conform to IEC 60598-1 clause 12.7.2. Features: Thermostat life testing...

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

IEC 60884-1 Clause 23.4 Power Cord Flexing Test Equipment For Plugs And Sockets Testing Product Information: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 figure 21 clause 23.4, which is used to process the flexing test...

Brand Name:Sinuo

Model Number:SN441-2000L

Place of Origin:China

IEC 60529 Fig 2 IP5X And IP6X Sand And Dust Test Chamber 2000L PLC Control Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and ...

Brand Name:Sinuo

Model Number:SNQC1008A

Place of Origin:China

IEC 60068-2-75 Mechanical Strength Test Pendulum Impact Test Apparatus For EV Charging Piles​ Product Information: Comply with standard EN IEC 61851-1-2019, 12.11 /IEC 61851-1-2017 clause 12.11, IEC60068-2-75:1997, IEC62262:2002, etc. For the mechanical ...

Brand Name:Sinuo

Model Number:SN771

Place of Origin:China

UL94 Horizontal Vertical Flame Chamber with power 50W 500W Flammability Test Equipment Product Information: Standard: IEC60695-11-10, IEC60695-11-20, UL94, IEC60695-11-2, IEC60695-11-3, IEC60695-11-4. Application:It is required by IEC 62368-1:2018 Annex...

Brand Name:Sinuo

Model Number:SN8815

Place of Origin:China

Oil Immersion Test Chamber IEC 62368-1 For Rubber & Enameled Wire Testing Oil Resistance Tester Product Overview: This Oil Immersion Test Chamber is designed for evaluating the oil resistance of rubber and plastic insulators or enameled wires, as required...

Brand Name:Sinuo

Model Number:SN1201B

Place of Origin:China

IEC62552:2015 Freestanding Warming Drawers Durability Testing Apparatus Product information: The Freestanding Warming Drawers Durability Testing Apparatus is designed according to customer-specific requirements. It is intended for vertical drawer ...

Brand Name:Sinuo

Model Number:SN1151A

Place of Origin:China

UL 964-2000 Mattress Pads Voltage Dielectric Strength Testing Equipment Product Overview This specialized testing equipment is designed for performing high voltage dielectric strength testing on mattress pads, electric blankets, and similar flexible ...

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

IEC 600950 Integrated 1.2 /50 µs and 10/700 μs Impulse Voltage Test Generator Product information: Standard: Conforms to IEC60065:2014 clause 10.2, 13.3.4 a), and IEC 60065:2014 clause 13.3.4 b), 14.2, IEC 60950-1:2013 clause 2.10.3.9, reference 2 & ...

Brand Name:Sinuo

Model Number:SN557B

Place of Origin:China

UL 2054 Clause 22 Battery Fire Exposure Test Apparatus PLC Control Overview: This apparatus conforms to UL2054 Clause 22 FIG. 22.1, UL 1642-2009 Clause 20 FIG. 20.1, GB 31241-2014 Article 7.9 FIG. E.2. Technical Parameters: 1 Sample limits This test ...

Brand Name:Sinuo

Model Number:SN1104-3

Place of Origin:China

IEC 62368-1 Clause 5.4.2, 5.5.8, Annex D Circuit 3 of Table D.1 Surge Test Generator 10KV Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:...

Brand Name:Sinuo

Model Number:SN882

Place of Origin:China

UV Weathering Test Chamber Ultraviolet Light Accelerated Aging Environmental Test Chamber Standards & Clauses: ASTMG53-77, GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS, SAE and etc. Samples and Restrictions: Coating, ink, paint, resin, ...

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment System introduction: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it ...

Brand Name:Sinuo

Model Number:SN881-225L

Place of Origin:China

IEC 60068 225L Programmable Temperature and Humidity Climatic Chamber Equipment Overview: This temperature and humidity chamber is required by various of standards, such as IEC60335-1 clause 15, IEC60598-1 clause 4.9, etc. This test chamber is used for ...

Brand Name:Sinuo

Model Number:SNQC1008

Place of Origin:China

Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1 Product Introduction For Accessories Mechanical Strength Impact Test Apparatus: The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 and ...

Brand Name:Sinuo

Model Number:SN5514

Place of Origin:China

Battery Small Parts Cylinder Tester ISO 8124-1 For Inspection Of Small Cells And Batteries Product information: The Battery Small Parts Test Cylinder is a stainless-steel measuring device designed to assess whether batteries and similar components may ...

Brand Name:Sinuo

Model Number:SNQC1010

Place of Origin:China

EV Plug & Connector Drive-Over Test Equipment IEC 62196-1 EV Charger Durability Testing Overview: The Vehicle Drive-Over Testing Apparatus is specifically designed to assess the resistance of EV plugs and connectors against accidental vehicle crushing...

Brand Name:Sinuo

Model Number:SN1125A

Place of Origin:China

IEC 60335-2-21 Electric Water Heaters Pulse Pressure Withstand Testing Machine Product information: This water heater liner pressure testing machine is designed to meet the requirements of IEC 60335-2-21 :2012 clause 22.47. The machine is designed for ...

Brand Name:Sinuo

Model Number:SNQC1007B

Place of Origin:China

Cable Anchorage Pull Force And Torque Tester For EV Charging Stations IEC 61851-23 This specialized testing equipment is designed and manufactured according to IEC 61851-23:2023 clause 11.6.102 and Figure 110, Figure 111 and Table 114 standards for ...